From: CCIEin2006 (ciscocciein2006@gmail.com)
Date: Sun Jan 29 2006 - 20:25:59 GMT-3
Is it sending BPDU's?
On 1/29/06, Faryar Zabihi (fzabihi) <fzabihi@cisco.com> wrote:
>
> how could users be on a port attached to a L3 device not part of STP?
> either way, if your question is answered.
>
> * Faryar Zabihi*
> * *
> ------------------------------
> *From:* CCIEin2006 [mailto:ciscocciein2006@gmail.com]
> *Sent:* Sunday, January 29, 2006 4:07 PM
> *To:* Hash Aminu
> *Cc:* Faryar Zabihi (fzabihi); ccielab@groupstudy.com
> *Subject:* Re: IRWB-RSv3 LAB 1 task 1.3/1.4
>
>
> Wait a minute...couldn't it be argued that the lab failed to say "do not
> configure on non-user ports" or configure it "ONLY" on user ports?
>
> One could also argue that since the router is not participating in SPT
> there is no reason for it to wait for forwarding delay...
>
>
> On 1/29/06, Hash Aminu <hashng@gmail.com> wrote:
> >
> > thank you zaheed , i can see why eople fail the LAB so many times
> > *SMIRK*
> >
> > On 1/28/06, Faryar Zabihi (fzabihi) < fzabihi@cisco.com> wrote:
> > > The requirement says to let "users" that plug into the switch should
> > > not have to wait for forwarding delay. Since fa0/2 is connected to a
> > > router, users will not plug into that port. KEY - users in vlan 2.
> > >
> > >
> > > Faryar Zabihi
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > Of
> > > Hashiru Aminu
> > > Sent: Saturday, January 28, 2006 2:57 PM
> > > To: ccielab@groupstudy.com
> > > Subject: IRWB-RSv3 LAB 1 task 1.3/1.4
> > >
> > > Dear All,
> > >
> > > Looking through the requirement of task 1.3 and 1.4 we are to enable
> > > portfast and BPDUguard for ports in VLAN 2.n the solution guide the
> > > features were enabled on fa0/10 and fa0/11 but going back to the table
> > > of VLAN/Port assignment on of the LAB SW1 fa0/2 connected to Fa0/0 of
> > R2
> > > is in VLAN 2.
> > > I believe the solution should include fa0/2 of SW1.
> > > I hope im not reading too much in to the requirements.
> > > I stand to be corrected.
> > > Someone with better understanding should shade some light on this
> > > please.
> > > TIA
> > >
> >
> >
> > --
> > B.Eng, MCP,CCNA, CCNP
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:50 GMT-3