From: Hash Aminu (hashng@gmail.com)
Date: Sun Jan 29 2006 - 17:06:14 GMT-3
thank you zaheed , i can see why eople fail the LAB so many times *SMIRK*
On 1/28/06, Faryar Zabihi (fzabihi) <fzabihi@cisco.com> wrote:
> The requirement says to let "users" that plug into the switch should
> not have to wait for forwarding delay. Since fa0/2 is connected to a
> router, users will not plug into that port. KEY - users in vlan 2.
>
>
> Faryar Zabihi
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Hashiru Aminu
> Sent: Saturday, January 28, 2006 2:57 PM
> To: ccielab@groupstudy.com
> Subject: IRWB-RSv3 LAB 1 task 1.3/1.4
>
> Dear All,
>
> Looking through the requirement of task 1.3 and 1.4 we are to enable
> portfast and BPDUguard for ports in VLAN 2.n the solution guide the
> features were enabled on fa0/10 and fa0/11 but going back to the table
> of VLAN/Port assignment on of the LAB SW1 fa0/2 connected to Fa0/0 of R2
> is in VLAN 2.
> I believe the solution should include fa0/2 of SW1.
> I hope im not reading too much in to the requirements.
> I stand to be corrected.
> Someone with better understanding should shade some light on this
> please.
> TIA
>
-- B.Eng, MCP,CCNA, CCNP
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:50 GMT-3