From: serge Hacobian (sergehh@hotmail.com)
Date: Wed Nov 16 2005 - 21:01:44 GMT-3
sorry if I wasn't clear.
I did clear and shut and no shut the Bri 0/0 , my question is should I
have two dialer map
statements in my config or just one for dialerwatch.
1= dialer map ip 150.1.5.0 name Rack1R5 broadcast 1111111 (dialer watch
mapping)
2= dialer map ip 136.1.45.5 name Rack1R5 broadcast 1111111 ( to bring up
for icmp )
>From: "Brian McGahan" <bmcgahan@internetworkexpert.com>
>To: "Bajo" <bajoalex@gmail.com>,"serge Hacobian" <sergehh@hotmail.com>
>CC: <ccielab@groupstudy.com>
>Subject: RE: IE lab3 task 5.7 - 5.11
>Date: Wed, 16 Nov 2005 18:48:00 -0500
>
>Did you try issuing the "clear interface bri0" command?
>
>Brian McGahan, CCIE #8593
>bmcgahan@internetworkexpert.com
>
>Internetwork Expert, Inc.
>http://www.InternetworkExpert.com
>Toll Free: 877-224-8987 x 705
>Outside US: 775-826-4344 x 705
>24/7 Support: http://forum.internetworkexpert.com
>Live Chat: http://www.internetworkexpert.com/chat/
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
>Of
> > Bajo
> > Sent: Wednesday, November 16, 2005 5:17 PM
> > To: serge Hacobian
> > Cc: ccielab@groupstudy.com
> > Subject: Re: IE lab3 task 5.7 - 5.11
> >
> > I will just keep the spid info with every lab.
> > I have my own lab and always do "write erase" on every router.
> > Unfortunately, after reload, my new ISDN config (SPID) will not come
>up
> > unless I hit the rest button on the ISDN simulator. Do not know if you
> > have
> > that luxury with rented lab.
> >
> > On 11/16/05, serge Hacobian <sergehh@hotmail.com> wrote:
> > >
> > > In regard to isdn config for dialer map statments a bit confused on
> > dialer
> > > map statements,once dialer watch is createad along with dialer map
>for
> > the
> > > dialer watched ip ,should I go ahead and remove prior mapping
>bettewn R4
> > > and
> > > R5. or let it stay, I tried removing and line wouldn't not come up.
> > >
> > > Thank you if you can shade some lite on this.
> > >
> > > config of R4
> > >
> > >
> > > !
> > > interface BRI0/0
> > > ip address 136.1.45.4 <http://136.1.45.4>
> > 255.255.255.248<http://255.255.255.248>
> > > encapsulation ppp
> > > dialer idle-timeout 5
> > > dialer map ip 150.1.5.0 <http://150.1.5.0> name Rack1R5 broadcast
> > 1111111
> > > dialer map ip 136.1.45.5 <http://136.1.45.5> name Rack1R5 broadcast
> > > 1111111
> > > dialer watch-group 1
> > > dialer-group 1
> > > isdn switch-type basic-ni
> > > isdn spid1 2222222
> > > compress stac
> > > ppp chap password 0 CISCO
> > >
> > >
> > > R5
> > >
> > > interface BRI0/0
> > > ip address 136.1.45.5 <http://136.1.45.5>
> > 255.255.255.248<http://255.255.255.248>
> > > encapsulation ppp
> > > dialer idle-timeout 0
> > > dialer map ip 136.1.45.4 <http://136.1.45.4> name Rack1R4 broadcast
> > > 2222222
> > > dialer-group 1
> > > isdn switch-type basic-ni
> > > isdn spid1 1111111
> > > compress stac
> > > ppp authentication chap
> > >
> > > _________________________________________________________________
> > > Is your PC infected? Get a FREE online computer virus scan from
>McAfee.
> > > Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
> > >
> > >
>_______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> >
> >
> >
> > --
> > Kind Regards,
> >
> > Bajo
> >
> >
>_______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3