From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Wed Nov 16 2005 - 21:09:43 GMT-3
Thanks for responding, Andy. I am not running any DLSw or bridge
groups....here is the show frame map from the R1 (hub router)....
R1#sh fram map
Serial0.1 (up): ipv6 FEC0::A:0:0:7B:1 dlci 102(0x66,0x1860), static,
broadcast,
CISCO, status defined, active
Serial0.1 (up): ipv6 FEC0::A:0:0:7B:2 dlci 102(0x66,0x1860), static,
CISCO, status defined, active
Serial0.1 (up): ipv6 FEC0::A:0:0:7B:3 dlci 103(0x67,0x1870), static,
broadcast,
CISCO, status defined, active
Serial0.1 (up): ip 172.16.123.2 dlci 102(0x66,0x1860), static,
broadcast,
CISCO, status defined, active
Serial0.1 (up): ip 172.16.123.3 dlci 103(0x67,0x1870), static,
broadcast,
CISCO, status defined, active
Serial0.2 (up): point-to-point dlci, dlci 104(0x68,0x1880), broadcast
status defined, active
R1#
-----Original Message-----
From: Edwards, Andrew M
To: Schulz, Dave
Sent: 11/16/2005 6:59 PM
Subject: RE: IPv6 on frame
Show frame map indicates what?
And, are you running DLSW by any chance or bridge-groups for transparent
bridge protocols?
andy
-----Original Message-----
From: Schulz, Dave [mailto:DSchulz@dpsciences.com]
Sent: Wednesday, November 16, 2005 3:20 PM
To: ccielab@groupstudy.com
Subject: IPv6 on frame
I am working on an issue with IPv6 across a frame. The host has two
sub-interfaces with ipv4 and ipv6 addresses. The multipoint works fine
(I have the ipv6 frame map statements). However, on the point-to-point
(and there is no frame map statements).....Ipv6 cannot ping across. I
think I'm missing something really simple, but cannot seem to locate it.
Any hints?
interface Serial0.1 multipoint
ip address 172.16.123.1 255.255.255.0
ip ospf priority 255
ipv6 address FEC0::A:0:0:7B:1/125
ipv6 address FE80::7B:1 link-local
frame-relay map ipv6 FEC0::A:0:0:7B:1 102 broadcast frame-relay map
ipv6 FEC0::A:0:0:7B:2 102 frame-relay map ipv6 FEC0::A:0:0:7B:3 103
broadcast frame-relay map ip 172.16.123.2 102 broadcast frame-relay
map ip 172.16.123.3 103 broadcast no frame-relay inverse-arp !
interface Serial0.2 point-to-point ip address 172.16.14.1 255.255.255.0
ipv6 address FEC0::B:0:0:E:1/125 ipv6 address FE80::7B:14 link-local
ipv6 enable frame-relay interface-dlci 104
Dave Schulz,
Email: dschulz@dpsciences.com <mailto:dschulz@dpsciences.com >
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3