From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Wed Nov 16 2005 - 20:19:47 GMT-3
I am working on an issue with IPv6 across a frame. The host has two
sub-interfaces with ipv4 and ipv6 addresses. The multipoint works fine
(I have the ipv6 frame map statements). However, on the point-to-point
(and there is no frame map statements).....Ipv6 cannot ping across. I
think I'm missing something really simple, but cannot seem to locate it.
Any hints?
interface Serial0.1 multipoint
ip address 172.16.123.1 255.255.255.0
ip ospf priority 255
ipv6 address FEC0::A:0:0:7B:1/125
ipv6 address FE80::7B:1 link-local
frame-relay map ipv6 FEC0::A:0:0:7B:1 102 broadcast
frame-relay map ipv6 FEC0::A:0:0:7B:2 102
frame-relay map ipv6 FEC0::A:0:0:7B:3 103 broadcast
frame-relay map ip 172.16.123.2 102 broadcast
frame-relay map ip 172.16.123.3 103 broadcast
no frame-relay inverse-arp
!
interface Serial0.2 point-to-point
ip address 172.16.14.1 255.255.255.0
ipv6 address FEC0::B:0:0:E:1/125
ipv6 address FE80::7B:14 link-local
ipv6 enable
frame-relay interface-dlci 104
Dave Schulz,
Email: dschulz@dpsciences.com <mailto:dschulz@dpsciences.com >
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3