From: serge Hacobian (sergehh@hotmail.com)
Date: Wed Nov 16 2005 - 03:13:10 GMT-3
In regard to isdn config for dialer map statments a bit confused on dialer
map statements,once dialer watch is createad along with dialer map for the
dialer watched ip ,should I go ahead and remove prior mapping bettewn R4 and
R5. or let it stay, I tried removing and line wouldn't not come up.
Thank you if you can shade some lite on this.
config of R4
!
interface BRI0/0
ip address 136.1.45.4 255.255.255.248
encapsulation ppp
dialer idle-timeout 5
dialer map ip 150.1.5.0 name Rack1R5 broadcast 1111111
dialer map ip 136.1.45.5 name Rack1R5 broadcast 1111111
dialer watch-group 1
dialer-group 1
isdn switch-type basic-ni
isdn spid1 2222222
compress stac
ppp chap password 0 CISCO
R5
interface BRI0/0
ip address 136.1.45.5 255.255.255.248
encapsulation ppp
dialer idle-timeout 0
dialer map ip 136.1.45.4 name Rack1R4 broadcast 2222222
dialer-group 1
isdn switch-type basic-ni
isdn spid1 1111111
compress stac
ppp authentication chap
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3