From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Wed Nov 16 2005 - 21:03:05 GMT-3
You need both. My reply was to Bajo about having to reset his
ISDN switch.
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: serge Hacobian [mailto:sergehh@hotmail.com]
> Sent: Wednesday, November 16, 2005 6:02 PM
> To: Brian McGahan; bajoalex@gmail.com
> Cc: ccielab@groupstudy.com
> Subject: RE: IE lab3 task 5.7 - 5.11
>
>
> sorry if I wasn't clear.
>
> I did clear and shut and no shut the Bri 0/0 , my question is
should I
> have two dialer map
> statements in my config or just one for dialerwatch.
>
> 1= dialer map ip 150.1.5.0 name Rack1R5 broadcast 1111111 (dialer
watch
> mapping)
> 2= dialer map ip 136.1.45.5 name Rack1R5 broadcast 1111111 ( to
bring
> up
> for icmp )
>
>
>
>
>
>
>
> >From: "Brian McGahan" <bmcgahan@internetworkexpert.com>
> >To: "Bajo" <bajoalex@gmail.com>,"serge Hacobian"
<sergehh@hotmail.com>
> >CC: <ccielab@groupstudy.com>
> >Subject: RE: IE lab3 task 5.7 - 5.11
> >Date: Wed, 16 Nov 2005 18:48:00 -0500
> >
> >Did you try issuing the "clear interface bri0" command?
> >
> >Brian McGahan, CCIE #8593
> >bmcgahan@internetworkexpert.com
> >
> >Internetwork Expert, Inc.
> >http://www.InternetworkExpert.com
> >Toll Free: 877-224-8987 x 705
> >Outside US: 775-826-4344 x 705
> >24/7 Support: http://forum.internetworkexpert.com
> >Live Chat: http://www.internetworkexpert.com/chat/
> >
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
Behalf
> >Of
> > > Bajo
> > > Sent: Wednesday, November 16, 2005 5:17 PM
> > > To: serge Hacobian
> > > Cc: ccielab@groupstudy.com
> > > Subject: Re: IE lab3 task 5.7 - 5.11
> > >
> > > I will just keep the spid info with every lab.
> > > I have my own lab and always do "write erase" on every router.
> > > Unfortunately, after reload, my new ISDN config (SPID) will not
come
> >up
> > > unless I hit the rest button on the ISDN simulator. Do not know if
you
> > > have
> > > that luxury with rented lab.
> > >
> > > On 11/16/05, serge Hacobian <sergehh@hotmail.com> wrote:
> > > >
> > > > In regard to isdn config for dialer map statments a bit confused
on
> > > dialer
> > > > map statements,once dialer watch is createad along with dialer
map
> >for
> > > the
> > > > dialer watched ip ,should I go ahead and remove prior mapping
> >bettewn R4
> > > > and
> > > > R5. or let it stay, I tried removing and line wouldn't not come
up.
> > > >
> > > > Thank you if you can shade some lite on this.
> > > >
> > > > config of R4
> > > >
> > > >
> > > > !
> > > > interface BRI0/0
> > > > ip address 136.1.45.4 <http://136.1.45.4>
> > > 255.255.255.248<http://255.255.255.248>
> > > > encapsulation ppp
> > > > dialer idle-timeout 5
> > > > dialer map ip 150.1.5.0 <http://150.1.5.0> name Rack1R5
broadcast
> > > 1111111
> > > > dialer map ip 136.1.45.5 <http://136.1.45.5> name Rack1R5
broadcast
> > > > 1111111
> > > > dialer watch-group 1
> > > > dialer-group 1
> > > > isdn switch-type basic-ni
> > > > isdn spid1 2222222
> > > > compress stac
> > > > ppp chap password 0 CISCO
> > > >
> > > >
> > > > R5
> > > >
> > > > interface BRI0/0
> > > > ip address 136.1.45.5 <http://136.1.45.5>
> > > 255.255.255.248<http://255.255.255.248>
> > > > encapsulation ppp
> > > > dialer idle-timeout 0
> > > > dialer map ip 136.1.45.4 <http://136.1.45.4> name Rack1R4
broadcast
> > > > 2222222
> > > > dialer-group 1
> > > > isdn switch-type basic-ni
> > > > isdn spid1 1111111
> > > > compress stac
> > > > ppp authentication chap
> > > >
> > > >
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3