From: Anis Faruqui (anisccie@gmail.com)
Date: Tue Sep 06 2005 - 05:07:24 GMT-3
hi group.
Yesterday night i have upgrade the Flash for my 2501 routers i can see it
as 16 MB flash but when i try to install the IOS i get this error
(Loading c2500-i-l.121-2.bin from 192.168.0.1 <http://192.168.0.1> (via
Ethernet0): !!!!!!!!!!Parity (control reg=0x718) Error, address: 0xE099CC at
0x1098CFC (PC) )
after this it get reboot :(
my sh version is pasted below any help will be highly appreciated.
Cisco Internetwork Operating System Software
IOS (tm) 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-1996 by cisco Systems, Inc.
Compiled Fri 27-Dec-96 17:33 by loreilly
Image text-base: 0x01010000, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
Router uptime is 1 minute
System restarted by power-on
Running default software
cisco 2500 (68030) processor (revision N) with 14336K/2048K bytes of memory.
Processor board ID 13633097, with hardware revision 00000000
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Need your help
regards,
Anis
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:14 GMT-3