From: Danny Muizebelt (Danny.Muizebelt@osiatis.at)
Date: Tue Sep 06 2005 - 05:30:52 GMT-3
Hi Anis,
It could be that you mixed INTEL and AMD flash chips. They don't behave well together. Do a "show flash chips" to see the brand flash you have installed in the two banks.
For me it looks like this:
R3#sh flash chips
16384K bytes of processor board System flash (Read ONLY)
Chip Bank Code Size Name
1 1 89A0 2048KB INTEL 28F016SA
2 1 89A0 2048KB INTEL 28F016SA
3 1 89A0 2048KB INTEL 28F016SA
4 1 89A0 2048KB INTEL 28F016SA
1 2 89A0 2048KB INTEL 28F016SA
2 2 89A0 2048KB INTEL 28F016SA
3 2 89A0 2048KB INTEL 28F016SA
4 2 89A0 2048KB INTEL 28F016SA
Executing current image from System flash
If you have INTEL and AMD mixed the only thing you can do is to partition the flash in two parts of each 8MB: "partition flash 2 8 8"
I don't know why exactly but an image can't cross a flash boundary between two different flash providers.
Maybe this is the problem you are experiencing.
Cheers,
Danny
Danny Muizebelt (CCNP, CCIP)
-----------------------------------------------------------------
OSIATIS Computer Services GmbH
Tel.: +43-1-79 520
-----------------------------------------------------------------
> -----Urspr|ngliche Nachricht-----
> Von: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Im Auftrag
> von Anis Faruqui
> Gesendet: Dienstag, 6. September 2005 10:07
> An: Cisco certification
> Betreff: Flash upgrade problem
>
> hi group.
> Yesterday night i have upgrade the Flash for my 2501 routers i can
> see it
> as 16 MB flash but when i try to install the IOS i get this error
> (Loading c2500-i-l.121-2.bin from 192.168.0.1 <http://192.168.0.1>
> (via
> Ethernet0): !!!!!!!!!!Parity (control reg=0x718) Error, address:
> 0xE099CC at
> 0x1098CFC (PC) )
> after this it get reboot :(
> my sh version is pasted below any help will be highly appreciated.
>
> Cisco Internetwork Operating System Software
> IOS (tm) 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c),
> RELEASE
> SOFTWARE (fc1)
> Copyright (c) 1986-1996 by cisco Systems, Inc.
> Compiled Fri 27-Dec-96 17:33 by loreilly
> Image text-base: 0x01010000, data-base: 0x00001000
>
> ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
>
> Router uptime is 1 minute
> System restarted by power-on
> Running default software
>
> cisco 2500 (68030) processor (revision N) with 14336K/2048K bytes of
> memory.
> Processor board ID 13633097, with hardware revision 00000000
> X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
> 1 Ethernet/IEEE 802.3 interface.
> 2 Serial network interfaces.
> 32K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
>
> Need your help
>
> regards,
>
> Anis
>
> ____________________________________________________________________
> ___
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Diese Information ist vertraulich und ausschlie_lich zur Kenntnisnahme durch den (die) genannten Adressaten bestimmt.
Wenn sie nicht der vorgesehene Adressat sind, informieren sie uns bitte unverz|glich.
The information herein is confidential and intended solely for the attention and use of the named addressee(s).
If you are not the intended recipient please inform us immediately.
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:14 GMT-3