From: KSGoh (kianseng.goh@gmail.com)
Date: Tue Sep 06 2005 - 11:26:15 GMT-3
hi..
u're getting this problem bcoz u're booting your ios from tftp server...
remove the tftp command from your config, save it and reload...
it will work..
----- Original Message -----
From: "Anis Faruqui" <anisccie@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Tuesday, September 06, 2005 4:07 PM
Subject: Flash upgrade problem
> hi group.
> Yesterday night i have upgrade the Flash for my 2501 routers i can see it
> as 16 MB flash but when i try to install the IOS i get this error
> (Loading c2500-i-l.121-2.bin from 192.168.0.1 <http://192.168.0.1> (via
> Ethernet0): !!!!!!!!!!Parity (control reg=0x718) Error, address: 0xE099CC
> at
> 0x1098CFC (PC) )
> after this it get reboot :(
> my sh version is pasted below any help will be highly appreciated.
>
> Cisco Internetwork Operating System Software
> IOS (tm) 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE
> SOFTWARE (fc1)
> Copyright (c) 1986-1996 by cisco Systems, Inc.
> Compiled Fri 27-Dec-96 17:33 by loreilly
> Image text-base: 0x01010000, data-base: 0x00001000
>
> ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
>
> Router uptime is 1 minute
> System restarted by power-on
> Running default software
>
> cisco 2500 (68030) processor (revision N) with 14336K/2048K bytes of
> memory.
> Processor board ID 13633097, with hardware revision 00000000
> X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
> 1 Ethernet/IEEE 802.3 interface.
> 2 Serial network interfaces.
> 32K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
>
> Need your help
>
> regards,
>
> Anis
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:14 GMT-3