From: Tony Schaffran (groupstudy@cconlinelabs.com)
Date: Tue Sep 06 2005 - 11:41:33 GMT-3
He is not booting from a TFTP server.
That is the normal process of upgrading Flash on a 2500 to put the Flash in
READ/WRITE.
The problem could be the TFTP server he is trying to copy the image from.
I have had issues where one TFTP server will not copy properly and another
will work fine for one hardware platform and visa versa for another hardware
platform.
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
KSGoh
Sent: Tuesday, September 06, 2005 7:26 AM
To: Anis Faruqui; Cisco certification
Subject: Re: Flash upgrade problem
hi..
u're getting this problem bcoz u're booting your ios from tftp server...
remove the tftp command from your config, save it and reload...
it will work..
----- Original Message -----
From: "Anis Faruqui" <anisccie@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Tuesday, September 06, 2005 4:07 PM
Subject: Flash upgrade problem
> hi group.
> Yesterday night i have upgrade the Flash for my 2501 routers i can see it
> as 16 MB flash but when i try to install the IOS i get this error
> (Loading c2500-i-l.121-2.bin from 192.168.0.1 <http://192.168.0.1> (via
> Ethernet0): !!!!!!!!!!Parity (control reg=0x718) Error, address: 0xE099CC
> at
> 0x1098CFC (PC) )
> after this it get reboot :(
> my sh version is pasted below any help will be highly appreciated.
>
> Cisco Internetwork Operating System Software
> IOS (tm) 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE
> SOFTWARE (fc1)
> Copyright (c) 1986-1996 by cisco Systems, Inc.
> Compiled Fri 27-Dec-96 17:33 by loreilly
> Image text-base: 0x01010000, data-base: 0x00001000
>
> ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
>
> Router uptime is 1 minute
> System restarted by power-on
> Running default software
>
> cisco 2500 (68030) processor (revision N) with 14336K/2048K bytes of
> memory.
> Processor board ID 13633097, with hardware revision 00000000
> X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
> 1 Ethernet/IEEE 802.3 interface.
> 2 Serial network interfaces.
> 32K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
>
> Need your help
>
> regards,
>
> Anis
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:14 GMT-3