From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Wed May 25 2005 - 12:33:56 GMT-3
Rik,
The problem is that the 2610 and 2611 can't recognize 32Mb flash
simms. All the 2600 and 2600XM images are effectively the same, the
only difference is that the 2620 and 2621 can recognize 32Mb flash simms
(2610 and 2611 cannot), and the 2600XMs can all support more RAM and
flash. So while you are correct that the Software Advisor says that the
2610 Enterprise Plus image supports this feature, the flash is not large
enough to hold the image.
Here is the image you would want:
BB2#dir slot0:
Directory of slot0:/
1 -rw- 18312232 <no date>
c2600-js-mz.122-15.T14.bin
20709376 bytes total (2397080 bytes free)
Here is a 2610 with a 16Mb flash:
Rack1R1#dir flash:
Directory of flash:/
1 -rw- 15184112 <no date>
c2600-j1s3-mz.122-15.T14.bin
16252928 bytes total (1068752 bytes free)
Rack1R1#
The image size is 18,312,232 but the flash size is 16,252,928.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Guyler, Rik
> Sent: Tuesday, May 24, 2005 6:56 PM
> To: 'ccielab@groupstudy.com'
> Subject: RE: Command "ipv6 ospf" on 2600 with IOS 12.2(15)T15
>
> So I take it since he has to boot the XM image from rommon that
copying it
> to flash won't work or did I miss something else in this thread? Is
this
> because he is trying to boot an XM image on a non-XM router?
>
> Rik
>
> -----Original Message-----
> From: Brian McGahan [mailto:bmcgahan@internetworkexpert.com]
> Sent: Tuesday, May 24, 2005 7:08 PM
> To: Bob Nelson; Cisco certification
> Subject: RE: Command "ipv6 ospf" on 2600 with IOS 12.2(15)T15
>
> Bob,
>
> Once you set the environment variables in rommon they will stay.
> For further booting you need to type just the "tftpdnld -r" command
and
> it will use the previously configured image name and tftp server.
You
> could script this in securecrt through VBScript.
>
> HTH,
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
> > -----Original Message-----
> > From: Bob Nelson [mailto:nelsnjr@cox.net]
> > Sent: Tuesday, May 24, 2005 4:24 PM
> > To: Brian McGahan; Chad Hintz; Mathew; Cisco certification
> > Subject: Re: Command "ipv6 ospf" on 2600 with IOS 12.2(15)T15
> >
> > Yep, that works!
> >
> > Router(config)#int s0/0
> > Router(config-if)#ipv6 ?
> > IPv6 interface subcommands:
> > address Configure IPv6 address on interface
> > cef Cisco Express Forwarding for IPv6
> > enable Enable IPv6 on interface
> > mtu Set IPv6 Maximum Transmission Unit
> > nat Enable IPv6 NAT on interface
> > nd IPv6 interface Neighbor Discovery subcommands
> > ospf OSPF interface commands
> > redirects Enable sending of ICMP Redirect messages
> > rip Configure RIP routing protocol
> > router IPv6 Router interface commands
> > traffic-filter Access control list for packets
> > unnumbered Preferred interface for source address selection
> > verify Enable per packet validation
> >
> > What I don't know is how to get the router to boot that way every
> time.
> > I can get it to the ROM mode, but is there a way to automatically
make
> it
> > do
> > the tftpdnld -r?
> >
> > Bob
> > ----- Original Message -----
> > From: "Brian McGahan" <bmcgahan@internetworkexpert.com>
> > To: "Chad Hintz" <ccie_2b2004@yahoo.com>; "Mathew"
> <mathew@oztralia.com>;
> > "Cisco certification" <ccielab@groupstudy.com>
> > Sent: Tuesday, May 24, 2005 7:28 AM
> > Subject: RE: Command "ipv6 ospf" on 2600 with IOS 12.2(15)T15
> >
> >
> > > You can boot the 2600XM enterprise plus image from TFTP to the
2610
> or
> > > 2611 via the "tftpdnld -r" command in rommon.
> > >
> > > HTH,
> > >
> > > Brian McGahan, CCIE #8593
> > > bmcgahan@internetworkexpert.com
> > >
> > > Internetwork Expert, Inc.
> > > http://www.InternetworkExpert.com
> > > Toll Free: 877-224-8987 x 705
> > > Outside US: 775-826-4344 x 705
> > > 24/7 Support: http://forum.internetworkexpert.com
> > > Live Chat: http://www.internetworkexpert.com/chat/
> > >
> > >
> > > > -----Original Message-----
> > > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf
> > > Of
> > > > Chad Hintz
> > > > Sent: Tuesday, May 24, 2005 7:11 AM
> > > > To: Mathew; 'Cisco certification'
> > > > Subject: Re: Command "ipv6 ospf" on 2600 with IOS 12.2(15)T15
> > > >
> > > > The 2610 does not support this feature, you need a 2620 or 21 to
> use
> > > > ospfv3.
> > > >
> > > > HTH,
> > > >
> > > > Chad
> > > >
> > > >
> > > > Hi Team
> > > >
> > > > Does anybody know why I can not enable IPV6 OSPF on 2600 with
IOS
> ver
> > > > 12.2(15)T15?
> > > >
> > > > Even after configuring "ipv6 unicast-routing" and "ipv6 enable"
> under
> > > the
> > > > interface, I do not see
> > > >
> > > > a OSPF option.
> > > >
> > > > Does anybody know why it is so?
> > > >
> > > > R2(config-if)#ipv6 ?
> > > > IPv6 interface subcommands:
> > > > address Configure IPv6 address on interface cef Cisco Express
> > > > Forwarding for IPv6 enable Enable IPv6 on interface mtu Set IPv6
> > > > Maximum Transmission Unit nat Enable IPv6 NAT on interface nd
IPv6
> > > > interface Neighbor Discovery subcommands redirects Enable
sending
> > > > of ICMP Redirect messages rip Configure RIP routing protocol
> > > > router IPv6 Router interface commands traffic-filter Access
> > > > control list for packets unnumbered Preferred interface for
source
> > > > address selection verify Enable per packet validation
> > > >
> > > > R2(config-if)#ipv6 ro
> > > > R2(config-if)#ipv6 router ?
> > > > isis IS-IS Routing for IPv6
> > > >
> > > > R2(config-if)#ipv6 router
> > > > R2(config-if)#do sho ver
> > > > Cisco Internetwork Operating System Software IOS (tm) C2600
> > > > Software (C2600-J1S3-M), Version 12.2(15)T15,
> RELEASE
> > > > SOFTWARE (fc1)
> > > > Technical Support: http://www.cisco.com/techsupport Copyright
(c)
> > > > 1986-2005 by cisco Systems, Inc.
> > > > Compiled Thu 03-Mar-05 03:28 by hqluong Image text-base:
> > > > 0x80008098, data-base: 0x81960D40
> > > >
> > > > ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE
(fc1)
> > > > ROM: C2600 Software (C2600-J1S3-M), Version 12.2(15)T15, RELEASE
> > > SOFTWARE
> > > > (fc1)
> > > >
> > > > R2 uptime is 47 minutes
> > > > System returned to ROM by power-on System image file is
> > > > "flash:c2600-j1s3-mz.122-15.T15.bin"
> > > >
> > > > cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K
> bytes
> > > of
> > > > memory.
> > > > Processor board ID JAD05090GQQ (1222274526) M860 processor: part
> > > > number 0, mask 49 Bridging software.
> > > > X.25 software, Version 3.0.0.
> > > > TN3270 Emulation software.
> > > > 1 Ethernet/IEEE 802.3 interface(s)
> > > > 2 Serial(sync/async) network interface(s)
> > > > 16 terminal line(s)
> > > > 32K bytes of non-volatile configuration memory.
> > > > 16384K bytes of processor board System flash (Read/Write)
> > > >
> > > > Configuration register is 0x2102
> > > >
> > > > R2(config-if)#
> > > >
> > > >
> > >
>
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:12:02 GMT-3