From: Ed Lui (edwlui@gmail.com)
Date: Thu Mar 24 2005 - 12:28:08 GMT-3
I vote for "A"
On Thu, 24 Mar 2005 22:46:51 +0800, Dillon Yang <gzdillon@hotmail.com> wrote:
> Hi, group:
>
> For asked to make a legacy DDR, which command is mandatory:
>
> 1. dialer in-band
> 2. dialer string
> 3. dialer map
>
> And, the following 3 config is used for one-way called party, can it satisfy the "legacy" requirement?
>
> === a ===
> interface BRI0
> ip address 3.3.35.1 255.255.255.0
> encapsulation ppp
> dialer idle-timeout 60
> dialer map ip 3.3.35.2 broadcast <no number>
> dialer map ip 3.3.35.2 broadcast <no numver>
> dialer-group 3
> isdn switch-type basic-ni
> isdn spid1 555011101 5550111
> isdn spid2 555033301 5550333
> no peer neighbor-route
>
> === b ===
> interface BRI0
> ip address 3.3.35.1 255.255.255.0
> encapsulation ppp
> dialer idle-timeout 0
> dialer map ip 3.3.35.2 broadcast 5550222
> dialer map ip 3.3.35.2 broadcast 5550444
> <no dialer-group>
> isdn switch-type basic-ni
> isdn spid1 555011101 5550111
> isdn spid2 555033301 5550333
> no peer neighbor-route
>
> === c ===
> interface BRI0
> ip address 3.3.35.1 255.255.255.0
> encapsulation ppp
> dialer idle-timeout 0
> dialer string 5550222
> <no map>
> <no dialer-group>
> isdn switch-type basic-ni
> isdn spid1 555011101 5550111
> isdn spid2 555033301 5550333
> no peer neighbor-route
>
> TIA
> dillon
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:51 GMT-3