From: Scott Morris (swm@emanon.com)
Date: Thu Mar 24 2005 - 12:22:45 GMT-3
The labs may be graded on a completely different pod. All pods are
standardized. But whatever you do should survive reload.
In order to test your functionality, all a proctor would need to do is set
the time on a master and things SHOULD start synchronizing throughout the
pod then. So configure it all to work, but don't be concerned with the
reboot. I'm sure they are able to work through the lack of HW clock! :)
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Zouta oxpf
Sent: Thursday, March 24, 2005 9:04 AM
To: Ivan Ostre9
Cc: ccielab@groupstudy.com
Subject: Re: Loose point on time setting?
Are not the labs graded before the routers are rebooted? If they are, is it
fair to ask the proctor about this? I mean setting the time on the ntp
master. Assuming it is allowed to set the time on the ntp master, what time
reference should be used? I will assume this to be a fair question for the
proctor.
just mine!
zzz
On Thu, 24 Mar 2005 12:23:27 +0100, Ivan Ostre9 <ivan.ostres@snt.hr> wrote:
> Hello Group,
>
> Maybe a stupid question but I'll ask anyway. If the question is to
configure NTP, would I loose that points if I don not set the time on NTP
master first?
>
> Regards,
> Ivan
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:51 GMT-3