From: Dillon Yang (gzdillon@hotmail.com)
Date: Thu Mar 24 2005 - 11:46:51 GMT-3
Hi, group:
For asked to make a legacy DDR, which command is mandatory:
1. dialer in-band
2. dialer string
3. dialer map
And, the following 3 config is used for one-way called party, can it satisfy the "legacy" requirement?
=== a ===
interface BRI0
ip address 3.3.35.1 255.255.255.0
encapsulation ppp
dialer idle-timeout 60
dialer map ip 3.3.35.2 broadcast <no number>
dialer map ip 3.3.35.2 broadcast <no numver>
dialer-group 3
isdn switch-type basic-ni
isdn spid1 555011101 5550111
isdn spid2 555033301 5550333
no peer neighbor-route
=== b ===
interface BRI0
ip address 3.3.35.1 255.255.255.0
encapsulation ppp
dialer idle-timeout 0
dialer map ip 3.3.35.2 broadcast 5550222
dialer map ip 3.3.35.2 broadcast 5550444
<no dialer-group>
isdn switch-type basic-ni
isdn spid1 555011101 5550111
isdn spid2 555033301 5550333
no peer neighbor-route
=== c ===
interface BRI0
ip address 3.3.35.1 255.255.255.0
encapsulation ppp
dialer idle-timeout 0
dialer string 5550222
<no map>
<no dialer-group>
isdn switch-type basic-ni
isdn spid1 555011101 5550111
isdn spid2 555033301 5550333
no peer neighbor-route
TIA
dillon
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:51 GMT-3