From: Ed Lui (edwlui@gmail.com)
Date: Thu Mar 24 2005 - 13:05:23 GMT-3
Scott,
Thanks for the lesson. BTW, I did not find the name of the author for
the ver. 7 workbook. Are you the author or did you review ..... etc ?
Thanks,
Edward
On Thu, 24 Mar 2005 10:38:25 -0500, Scott Morris <swm@emanon.com> wrote:
> Dialer in-band is used if you need to pass commands to the actual "hardware"
> in the DDR setup. This typically means chat-scripts for async modems. In
> the ISDN world, you really have no need to do this.
>
> The phone number would be the mandatory part. Whether delivered through the
> dialer map or the dialer string shouldn't matter. Legacy DDR does things
> like this at the physical level and does not use dialer profiles.
>
> HTH,
>
> Scott
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Ed
> Lui
> Sent: Thursday, March 24, 2005 10:28 AM
> To: Dillon Yang
> Cc: Group Study
> Subject: Re: Dial legacy DDR mandatory condition
>
> I vote for "A"
>
> On Thu, 24 Mar 2005 22:46:51 +0800, Dillon Yang <gzdillon@hotmail.com>
> wrote:
> > Hi, group:
> >
> > For asked to make a legacy DDR, which command is mandatory:
> >
> > 1. dialer in-band
> > 2. dialer string
> > 3. dialer map
> >
> > And, the following 3 config is used for one-way called party, can it
> satisfy the "legacy" requirement?
> >
> > === a ===
> > interface BRI0
> > ip address 3.3.35.1 255.255.255.0
> > encapsulation ppp
> > dialer idle-timeout 60
> > dialer map ip 3.3.35.2 broadcast <no number> dialer map ip 3.3.35.2
> > broadcast <no numver> dialer-group 3 isdn switch-type basic-ni isdn
> > spid1 555011101 5550111 isdn spid2 555033301 5550333 no peer
> > neighbor-route
> >
> > === b ===
> > interface BRI0
> > ip address 3.3.35.1 255.255.255.0
> > encapsulation ppp
> > dialer idle-timeout 0
> > dialer map ip 3.3.35.2 broadcast 5550222 dialer map ip 3.3.35.2
> > broadcast 5550444 <no dialer-group> isdn switch-type basic-ni isdn
> > spid1 555011101 5550111 isdn spid2 555033301 5550333 no peer
> > neighbor-route
> >
> > === c ===
> > interface BRI0
> > ip address 3.3.35.1 255.255.255.0
> > encapsulation ppp
> > dialer idle-timeout 0
> > dialer string 5550222
> > <no map>
> > <no dialer-group>
> > isdn switch-type basic-ni
> > isdn spid1 555011101 5550111
> > isdn spid2 555033301 5550333
> > no peer neighbor-route
> >
> > TIA
> > dillon
> >
> > ______________________________________________________________________
> > _ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:51 GMT-3