From: Mesut Abdurrahmani (mesut@kujtesa.com)
Date: Tue Feb 01 2005 - 17:22:30 GMT-3
Hi
I'm trying to implement Remote SPAN feature on my 2 x 2950 but wasn't
successful till now. I have created a Remote Span Vlan on both switches
(VLAN 6), switches are interconnected through a trunk (Fa0/5). On source
switch I've used the following commands
Monitor session 1 source interface fa0/6 - 24 tx
Monitor session 1 destination remote vlan 6 reflector-port fa0/5
And on destination switch
Monitor session 1 source remote vlan 6
Monitor session 1 destination interface fa0/24
There are no access ports that use vlan 6 (RSPAN VLAN )as it meant to be and
all I've disabled Pruning on Vlan 6.
The Reflector-port (fa0/5) on switch A and destination interface on Switch B
(fa0/24) goes on monitoring state, which is OK
FastEthernet0/24 is down, line protocol is down (monitoring)
Hope to get help
Thanks in Advance,
Regards,
Mesut Abdurrahmani
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:15 GMT-3