From: joshua lauer (jslauer@hotmail.com)
Date: Fri Jan 07 2005 - 20:54:07 GMT-3
Me too,
I know now what I'll be spending my friday evening doing....I'm not going to
sleep until I make it do........something or break something.
jl
Joshua Lauer
RHCE, MCSE, CCNA, CCDA, CCDP, CCNP, CCIP, CCSP,INFOSEC
----- Original Message -----
From: "McLaughlin, Jeffery" <JMcLaughlin@sfchronicle.com>
To: "Brian McGahan" <bmcgahan@internetworkexpert.com>;
<ccielab@groupstudy.com>
Sent: Friday, January 07, 2005 6:50 PM
Subject: RE: IEWB Lab 2 Task 9.10 [More arp frame-relay]
> Another curious thing about this command ("arp frame-relay"). In the
> command
> reference, they give the following example:
>
> "The following example enables frame relay services:
> interface ethernet 0
> arp frame-relay"
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/ipras
> _r/ip1_a1g.htm#wp1079956
>
> Kind of odd they'd apply it to the Ethernet interface, no?
>
> I tried this on a few routers. Although they took the command, there is
> seemingly no effect:
>
> R#sh int fa0/0 | i ARP
> Encapsulation ARPA, loopback not set
> ARP type: ARPA, ARP Timeout 04:00:00
> R#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> R(config)#int fa0/0
> R(config-if)#arp fr
> R(config-if)#^Z
> R#sh int fa0/0 | i ARP
> Encapsulation ARPA, loopback not set
> ARP type: ARPA, ARP Timeout 04:00:00
> R#sh run int fa0/0 | i arp
> R#
>
> Maybe a hopeless quest, but I'm now committed to figuring out what this
> command ever did...
>
> Jeff McLaughlin
> CCIE #14023
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Brian McGahan
> Sent: Friday, January 07, 2005 1:48 PM
> To: reo@chavallos.net; ccielab@groupstudy.com
> Subject: RE: IEWB Lab 2 Task 9.10
>
> Reo,
>
> As far as I can tell the "no arp frame-relay" command is
> deprecated. I'm sure it served a purpose when it was introduced in IOS
> 10.0, but in the current versions it does nothing that is immediately
> apparent. If anyone has a concrete example of what this command
> specifically does I would love to see it.
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
>
>
> --------------------
> This e-mail message is intended only for the personal use of the
> recipient(s)
> named above. If you are not an intended recipient, you may not review,
> copy or
> distribute this message. If you have received this communication in error,
> please notify the San Francisco Chronicle (chronfeedback@sfchronicle.com)
> immediately by e-mail and delete the original message.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:20 GMT-3