From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Fri Jan 07 2005 - 20:52:43 GMT-3
Anyone with a service contract care to submit a P5 case on this?
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: McLaughlin, Jeffery [mailto:JMcLaughlin@sfchronicle.com]
> Sent: Friday, January 07, 2005 5:51 PM
> To: Brian McGahan; ccielab@groupstudy.com
> Subject: RE: IEWB Lab 2 Task 9.10 [More arp frame-relay]
>
> Another curious thing about this command ("arp frame-relay"). In the
> command reference, they give the following example:
>
> "The following example enables frame relay services:
> interface ethernet 0
> arp frame-relay"
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/
ip
> ras_r/ip1_a1g.htm#wp1079956
>
> Kind of odd they'd apply it to the Ethernet interface, no?
>
> I tried this on a few routers. Although they took the command, there
is
> seemingly no effect:
>
> R#sh int fa0/0 | i ARP
> Encapsulation ARPA, loopback not set
> ARP type: ARPA, ARP Timeout 04:00:00
> R#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> R(config)#int fa0/0
> R(config-if)#arp fr
> R(config-if)#^Z
> R#sh int fa0/0 | i ARP
> Encapsulation ARPA, loopback not set
> ARP type: ARPA, ARP Timeout 04:00:00
> R#sh run int fa0/0 | i arp
> R#
>
> Maybe a hopeless quest, but I'm now committed to figuring out what
this
> command ever did...
>
> Jeff McLaughlin
> CCIE #14023
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of Brian McGahan
> Sent: Friday, January 07, 2005 1:48 PM
> To: reo@chavallos.net; ccielab@groupstudy.com
> Subject: RE: IEWB Lab 2 Task 9.10
>
> Reo,
>
> As far as I can tell the "no arp frame-relay" command is
> deprecated. I'm sure it served a purpose when it was introduced in
IOS
> 10.0, but in the current versions it does nothing that is immediately
> apparent. If anyone has a concrete example of what this command
> specifically does I would love to see it.
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
>
>
> --------------------
> This e-mail message is intended only for the personal use of the
> recipient(s) named above. If you are not an intended recipient, you
may
> not review, copy or distribute this message. If you have received this
> communication in error, please notify the San Francisco Chronicle
> (chronfeedback@sfchronicle.com) immediately by e-mail and delete the
> original message.
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:20 GMT-3