CIR=0 and Tc=?

From: Sean C (Upp_and_Upp@hotmail.com)
Date: Wed Dec 08 2004 - 14:28:18 GMT-3

Next message: McClure, Allen: "OT: Internal SLA/SLT's (Retail)"
Previous message: Tony Schaffran: "RE: saving configuration for remote rack time (VLAN.DAT) File"
Next in thread: Brian McGahan: "RE: CIR=0 and Tc=?"
Maybe reply: Brian McGahan: "RE: CIR=0 and Tc=?"
Maybe reply: Sean C: "Re: CIR=0 and Tc=?"
Maybe reply: Brian McGahan: "RE: CIR=0 and Tc=?"
Maybe reply: Brian Dennis: "RE: CIR=0 and Tc=?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello,

If I'm given a CIR=0 and the time interval is 1/10 of a second, what will be
my Tc?

Will I configure:
frame-relay tc 100
or
frame-relay tc 10

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fwan_
r/frcmds/wrffr3.htm#wp1029690

My mind is going to mush with milliseconds.

Thanks in advance, Sean

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.806 / Virus Database: 548 - Release Date: 12/5/2004

Next message: McClure, Allen: "OT: Internal SLA/SLT's (Retail)"
Previous message: Tony Schaffran: "RE: saving configuration for remote rack time (VLAN.DAT) File"
Next in thread: Brian McGahan: "RE: CIR=0 and Tc=?"
Maybe reply: Brian McGahan: "RE: CIR=0 and Tc=?"
Maybe reply: Sean C: "Re: CIR=0 and Tc=?"
Maybe reply: Brian McGahan: "RE: CIR=0 and Tc=?"
Maybe reply: Brian Dennis: "RE: CIR=0 and Tc=?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:25 GMT-3