From: Anand Singh (anandksi@cisco.com)
Date: Mon Oct 11 2004 - 11:21:33 GMT-3
Hello All,
If i have to configure router to forward all voip traffic to the voice
gateway, can i use the following config:
dial-peer voice 3 voip
destination-pattern .%
session target ipv4:3.3.3.3
!
What' the difference between this and using "destination-pattern .T". I know
later will tell router to wait for interdigit timeout before placing the
call but is both config valid for above requirement?
Thanks
-Anand
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:46 GMT-3