From: Campbell, Mark (campbell.mark@siemens.com)
Date: Mon Oct 11 2004 - 12:23:09 GMT-3
Hi Anand,
The best way test this would be to "debug dialpeer" and do "csim start
(random number)" and see if there's a match to the dial-peer voice
instance you used .% in...(otherwise just use your phone instead of
csim.)
Regards,
Mark
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Anand Singh
Sent: Monday, October 11, 2004 4:22 PM
To: ccielab@groupstudy.com
Subject: Forward all voip traffic to gateway
Hello All,
If i have to configure router to forward all voip traffic to the voice
gateway, can i use the following config:
dial-peer voice 3 voip
destination-pattern .%
session target ipv4:3.3.3.3
!
What' the difference between this and using "destination-pattern .T". I
know
later will tell router to wait for interdigit timeout before placing the
call but is both config valid for above requirement?
Thanks
-Anand
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:46 GMT-3