From: sglzx (sglzx@163.com)
Date: Mon Sep 06 2004 - 12:56:19 GMT-3
Did anyone succeed configuring the MLPOFR /MLPOATM ?
One of my customer dictate to use this method to carry Voice service.
I do this in the lab environment ,the configuration same as cisco's website ,but it doesn't work.
c7206+PA-A3-OC3MM-------ATM/FR(IWF)----C2611+2 V35
C7206
#sho ver
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-JS-M), Version 12.1(5)T1, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Sun 03-Dec-00 00:35 by ccai
Image text-base: 0x60008960, data-base: 0x616F0000
ROM: System Bootstrap, Version 12.0(19990210:195103) [12.0XE 105], DEVELOPMENT SOFTWARE
BOOTFLASH: 7200 Software (C7200-BOOT-M), Version 12.0(4)T, RELEASE SOFTWARE (fc1)
sz-test uptime is 6 hours, 55 minutes
System returned to ROM by reload at 16:58:27 Peking Mon Sep 6 2004
System restarted at 17:00:17 Peking Mon Sep 6 2004
System image file is "slot0:c7200-js-mz.121-5.T1.bin"
cisco 7206VXR (NPE300) processor (revision B) with 122880K/40960K bytes of memory.
Processor board ID 13252175
R7000 CPU at 262Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache
6 slot VXR midplane, Version 2.0
Last reset from power-on
G.703/E1 software, Version 1.0.
G.703/JT2 software, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 FastEthernet/IEEE 802.3 interface(s)
12 Serial network interface(s)
1 ATM network interface(s)
125K bytes of non-volatile configuration memory.
20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
interface ATM6/0
no ip address
atm sonet stm-1
no atm auto-configuration
no atm ilmi-keepalive
no atm address-registration
!
interface ATM6/0.1 point-to-point
pvc 13/115
vbr-nrt 2048 1024 36
encapsulation aal5snap
protocol ppp Virtual-Template1
!
--More-- !
interface ATM6/0.2 point-to-point
pvc 13/114
vbr-nrt 2048 1024 36
encapsulation aal5snap
protocol ppp Virtual-Template1
!
!
interface Virtual-Template1
ip unnumbered Loopback0
service-policy output atm-fr
ppp multilink
ppp multilink interleave
no ppp multilink fragmentation
!
c2611:
Router>en
Router#sho ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS-M), Version 12.1(24), RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 12-May-04 04:45 by cmong
Image text-base: 0x80008088, data-base: 0x80CDBB18
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Router uptime is 17 minutes
System returned to ROM by reload
System image file is "flash:c2600-is-mz.121-24.bin"
cisco 2611 (MPC860) processor (revision 0x203) with 26624K/6144K bytes of memory.
Processor board ID JAD05220SNA (3880574384)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
int s0/0
no ip address
encapsulation frame-relay IETF
no ip mroute-cache
no fair-queue
--More-- frame-relay traffic-shaping
frame-relay lmi-type ansi
!
interface Serial0/0.1 point-to-point
frame-relay interface-dlci 113 ppp Virtual-Template1
class test
!
interface Serial0/1
no ip address
encapsulation frame-relay IETF
frame-relay lmi-type ansi
!
interface Serial0/1.1 point-to-point
frame-relay interface-dlci 113 ppp Virtual-Template1
class test
!
interface Virtual-Template1
ip unnumbered Loopback0
service-policy output fr-atm
ppp multilink
ppp multilink fragment-delay 10
ppp multilink interleave
!
Router#sho ip int b
Interface IP-Address OK? Method Status Protocol
Ethernet0/0 unassigned YES NVRAM up down
Serial0/0 unassigned YES NVRAM up up
Serial0/0.1 unassigned YES unset up up
Ethernet0/1 unassigned YES NVRAM administratively down down
Serial0/1 unassigned YES NVRAM up up
Serial0/1.1 unassigned YES unset up up
Virtual-Access1 192.168.1.2 YES TFTP up down
Virtual-Template1 192.168.1.2 YES TFTP down down
Virtual-Access2 192.168.1.2 YES TFTP up down
Loopback0 192.168.1.2 YES NVRAM up up
Router#
WHY ???
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:37 GMT-3