From: Hao Zhong (hao_zhong@yahoo.com)
Date: Mon Sep 06 2004 - 13:10:27 GMT-3
You need to create a "interface multilink". Then under
"interface virtual-template", you need to add
"multi-group" command to associate it with the
multilink interface you created.
Hao
--- sglzx <sglzx@163.com> wrote:
> Did anyone succeed configuring the MLPOFR /MLPOATM ?
> One of my customer dictate to use this method to
> carry Voice service.
> I do this in the lab environment ,the configuration
> same as cisco's website ,but it doesn't work.
> c7206+PA-A3-OC3MM-------ATM/FR(IWF)----C2611+2 V35
>
>
> C7206
> #sho ver
> Cisco Internetwork Operating System Software
> IOS (tm) 7200 Software (C7200-JS-M), Version
> 12.1(5)T1, RELEASE SOFTWARE (fc1)
> Copyright (c) 1986-2000 by cisco Systems, Inc.
> Compiled Sun 03-Dec-00 00:35 by ccai
> Image text-base: 0x60008960, data-base: 0x616F0000
>
> ROM: System Bootstrap, Version 12.0(19990210:195103)
> [12.0XE 105], DEVELOPMENT SOFTWARE
> BOOTFLASH: 7200 Software (C7200-BOOT-M), Version
> 12.0(4)T, RELEASE SOFTWARE (fc1)
>
> sz-test uptime is 6 hours, 55 minutes
> System returned to ROM by reload at 16:58:27 Peking
> Mon Sep 6 2004
> System restarted at 17:00:17 Peking Mon Sep 6 2004
> System image file is
> "slot0:c7200-js-mz.121-5.T1.bin"
>
> cisco 7206VXR (NPE300) processor (revision B) with
> 122880K/40960K bytes of memory.
> Processor board ID 13252175
> R7000 CPU at 262Mhz, Implementation 39, Rev 1.0,
> 256KB L2, 2048KB L3 Cache
> 6 slot VXR midplane, Version 2.0
>
> Last reset from power-on
> G.703/E1 software, Version 1.0.
> G.703/JT2 software, Version 1.0.
> Bridging software.
> X.25 software, Version 3.0.0.
> SuperLAT software (copyright 1990 by Meridian
> Technology Corp).
> TN3270 Emulation software.
> 2 FastEthernet/IEEE 802.3 interface(s)
> 12 Serial network interface(s)
> 1 ATM network interface(s)
> 125K bytes of non-volatile configuration memory.
>
> 20480K bytes of Flash PCMCIA card at slot 0 (Sector
> size 128K).
> 4096K bytes of Flash internal SIMM (Sector size
> 256K).
> Configuration register is 0x2102
>
> interface ATM6/0
> no ip address
> atm sonet stm-1
> no atm auto-configuration
> no atm ilmi-keepalive
> no atm address-registration
> !
> interface ATM6/0.1 point-to-point
> pvc 13/115
> vbr-nrt 2048 1024 36
> encapsulation aal5snap
> protocol ppp Virtual-Template1
> !
> --More-- !
> interface ATM6/0.2 point-to-point
> pvc 13/114
> vbr-nrt 2048 1024 36
> encapsulation aal5snap
> protocol ppp Virtual-Template1
> !
> !
> interface Virtual-Template1
> ip unnumbered Loopback0
> service-policy output atm-fr
> ppp multilink
> ppp multilink interleave
> no ppp multilink fragmentation
> !
>
>
> c2611:
> Router>en
> Router#sho ver
> Cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-IS-M), Version
> 12.1(24), RELEASE SOFTWARE (fc2)
> Copyright (c) 1986-2004 by cisco Systems, Inc.
> Compiled Wed 12-May-04 04:45 by cmong
> Image text-base: 0x80008088, data-base: 0x80CDBB18
>
> ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE
> SOFTWARE (fc1)
>
> Router uptime is 17 minutes
> System returned to ROM by reload
> System image file is "flash:c2600-is-mz.121-24.bin"
>
> cisco 2611 (MPC860) processor (revision 0x203) with
> 26624K/6144K bytes of memory.
> Processor board ID JAD05220SNA (3880574384)
> M860 processor: part number 0, mask 49
> Bridging software.
> X.25 software, Version 3.0.0.
> 2 Ethernet/IEEE 802.3 interface(s)
> 2 Serial network interface(s)
> 32K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash
> (Read/Write)
>
> Configuration register is 0x2102
>
>
>
> int s0/0
> no ip address
> encapsulation frame-relay IETF
> no ip mroute-cache
> no fair-queue
> --More-- frame-relay
> traffic-shaping
> frame-relay lmi-type ansi
> !
> interface Serial0/0.1 point-to-point
> frame-relay interface-dlci 113 ppp
> Virtual-Template1
> class test
> !
>
> interface Serial0/1
> no ip address
> encapsulation frame-relay IETF
> frame-relay lmi-type ansi
> !
> interface Serial0/1.1 point-to-point
> frame-relay interface-dlci 113 ppp
> Virtual-Template1
> class test
> !
> interface Virtual-Template1
> ip unnumbered Loopback0
> service-policy output fr-atm
> ppp multilink
> ppp multilink fragment-delay 10
> ppp multilink interleave
> !
>
>
> Router#sho ip int b
> Interface IP-Address OK?
> Method Status Protocol
> Ethernet0/0 unassigned YES NVRAM
> up down
> Serial0/0 unassigned YES NVRAM
> up up
> Serial0/0.1 unassigned YES unset
> up up
> Ethernet0/1 unassigned YES NVRAM
> administratively down down
> Serial0/1 unassigned YES NVRAM
> up up
> Serial0/1.1 unassigned YES unset
> up up
> Virtual-Access1 192.168.1.2 YES TFTP
> up down
> Virtual-Template1 192.168.1.2 YES TFTP
> down down
> Virtual-Access2 192.168.1.2 YES TFTP
> up down
> Loopback0 192.168.1.2 YES NVRAM
> up up
> Router#
>
>
>
>
> WHY ???
>
>
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:37 GMT-3