From: Patrick Torney (ptorney@satx.rr.com)
Date: Thu Jul 29 2004 - 17:19:41 GMT-3
sorry.. quick correction to a typo... I meant "LMI type", not 'time'...
----- Original Message -----
From: "Patrick Torney" <ptorney@satx.rr.com>
To: "Brian Dennis" <bdennis@internetworkexpert.com>; <gladston@br.ibm.com>;
<ccielab@groupstudy.com>
Sent: Thursday, July 29, 2004 1:02 PM
Subject: Re: RE: Frame-relay interface Tracking
> I think changing the LMI time on the frame interface will have the same
> effect... except when you do change it you won't loose your frame-relay
> specific config stuff...
>
> Router(config-if)#frame-relay lmi-type q933a
> Router(config-if)#end
> Router#
>
> !Before config took effect...
> Router#sh ip int brief
> Interface IP-Address OK? Method Status
> Protocol
> ...
> Serial0 unassigned YES unset up
> up
> ...
> !after changed lmi type
> Router#
> *Mar 11 00:06:26.692: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> Serial0, changed state to down
> Router#sh ip int brief
> Interface IP-Address OK? Method Status
> Prot
> ocol
> ...
> Serial0 unassigned YES unset up
> down
> ...
>
> Router#
>
> HTH,
> Pat Torney
>
> ----- Original Message -----
> From: "Brian Dennis" <bdennis@internetworkexpert.com>
> To: <gladston@br.ibm.com>; <ccielab@groupstudy.com>
> Sent: Thursday, July 29, 2004 12:30 PM
> Subject: RE: RE: Frame-relay interface Tracking
>
>
> > Change the interface encapsulation:
> >
> > Rack1R4(config)#int s0/0
> > Rack1R4(config-if)#encap ppp
> > Not all config may be removed and may reappear after reactivating the
> > sub-interface
> > Error:Crypto EzVPN does not exist.
> > Rack1R4(config-if)#
> > %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state
> > to down
> >
> > Change the Frame Relay interface type to DCE:
> >
> > Rack1R4(config)#frame-relay switching
> > Rack1R4(config)#int s0/0
> > Rack1R4(config-if)#fram intf-type dce
> > Rack1R4(config-if)#
> > %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state
> > to down
> >
> > Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> > bdennis@internetworkexpert.com
> > Internetwork Expert, Inc.
> > http://www.InternetworkExpert.com
> > Toll Free: 877-224-8987
> > Direct: 775-745-6404 (Outside the US and Canada)
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > gladston@br.ibm.com
> > Sent: Thursday, July 29, 2004 8:10 AM
> > To: ccielab@groupstudy.com
> > Subject: Re: RE: Frame-relay interface Tracking
> >
> > Brian,
> >
> > Would you please give us an example? (to shutdown without goint into FR
> > switch)
> >
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:06 GMT-3