From: barrerj1@hotmail.com
Date: Thu Jul 08 2004 - 14:49:42 GMT-3
Hi everyone,
I have the following problem between 2 sites using WIC-t1-DSU cards
The remote site is currently using version 1 of the card and the remote
site 2 is using version 2 of the same cards
My problem is that the line is continually flapping at the central site;
the service provider tells me that their equipment is Ok.
I know theirs is a procedure to test the WIC cards, I can not find it.
As you know, I have to prove them that it's not the equipment.
Can anyone point me to the CCO link that tells you how to test the
hardware?
Remote Site
WHS#
interface Serial0/0
description Link to 1930 Site
ip address 192.168.30.10 255.255.255.252
no ip directed-broadcast
no ip mroute-cache
service-module t1 timeslots 1-24
service-module t1 remote-alarm-enable
end
Central Site
1930r#
sh run int s0/1
Building configuration...
Current configuration : 260 bytes
!
interface Serial0/1
description Link to 3100 Tollview
ip address 192.168.30.9 255.255.255.252
service-module t1 cablelength short 220ft
service-module t1 clock source internal
service-module t1 timeslots 1-24
service-module t1 remote-alarm-enable
end
Thanks
JB
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:50 GMT-3