From: Marvin Greenlee (marvingreenlee@yahoo.com)
Date: Thu Jul 08 2004 - 15:29:23 GMT-3
Here's another link:
http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a00800a5f40.shtml
Marvin Greenlee
--- barrerj1@hotmail.com wrote:
> Hi everyone,
>
>
>
> I have the following problem between 2 sites using
> WIC-t1-DSU cards
>
>
>
> The remote site is currently using version 1 of the
> card and the remote
> site 2 is using version 2 of the same cards
>
>
>
>
>
> My problem is that the line is continually flapping
> at the central site;
> the service provider tells me that their equipment
> is Ok.
>
>
>
> I know theirs is a procedure to test the WIC cards,
> I can not find it.
>
>
>
> As you know, I have to prove them that it's not the
> equipment.
>
>
>
> Can anyone point me to the CCO link that tells you
> how to test the
> hardware?
>
>
>
>
>
>
>
> Remote Site
>
>
>
>
>
> WHS#
>
> interface Serial0/0
>
> description Link to 1930 Site
>
> ip address 192.168.30.10 255.255.255.252
>
> no ip directed-broadcast
>
> no ip mroute-cache
>
> service-module t1 timeslots 1-24
>
> service-module t1 remote-alarm-enable
>
> end
>
>
>
>
>
>
>
> Central Site
>
> 1930r#
>
> sh run int s0/1
>
> Building configuration...
>
>
>
> Current configuration : 260 bytes
>
> !
>
> interface Serial0/1
>
> description Link to 3100 Tollview
>
> ip address 192.168.30.9 255.255.255.252
>
> service-module t1 cablelength short 220ft
>
> service-module t1 clock source internal
>
> service-module t1 timeslots 1-24
>
> service-module t1 remote-alarm-enable
>
> end
>
>
>
>
>
>
>
> Thanks
>
> JB
>
>
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:11:50 GMT-3