From: David Hurtado (dei2viccie@hotmail.com)
Date: Tue Apr 13 2004 - 15:51:38 GMT-3
Hello everybody,
I have a problem with IRB. This is my topology:
(R6) Fast0/0.16----------E0/0 (R1) S0/0.2 ---------s0.1 (R2) Fast0
These are the addresses:
R6:
Fast0/0.16: 192.10.1.6
R1:
E0/0 and S0/0.2 are contained in a bridge group with IRB
BVI 1: 192.10.1.1
R2:
Fast0 and S0.1 are contained in a bridge group with IRB
BVI 1: 192.10.1.2
The connection between R1 and R2 is OK. But the connection between R1 and R6
goes down and up continously.
I have tried applying the IP addres (192.10.1.1) directly on E0/0 and
everything goes OK. But when i go back to the IRB configuration the problem
appears again.
I have reviewed the IRB looking for some limitation for Ethernet interfaces,
but there is none.
I hope somebody could tell me why it doesn't work.
If you need more information, just ask.
Thanks a lot
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:47 GMT-3