From: wwwjjang@chol.com
Date: Sat Jan 24 2004 - 12:12:18 GMT-3
Hi..Everyone..
I'm studying VoIP Hunt-Group Test..
But it doesn't work well..
Who knows the reason ???
Help me...
--------
Diagram
--------
Phone-A(1111)--R1-S0(1.1.1.1)-----s0(1.1.1.2)-R2----Phone-C(2222)
/
/
Phone-B(1111)
----------
Question
----------
-I wish When Phone-C calls to the 1111,
Phone-A should ring Only if Phone-B is in busy-state...
-When Phone-B is not busy, Phone-B should ring..
----------
My-Config
----------
-----
R1>
------
dial-peer voice 1111 pots **>Phone-A
preference 2 **
destination-pattern 1111
port 1/0/0
!
dial-peer voice 11111 pots **>Phone-B
preference 1 **
destination-pattern 1111
port 1/0/1
!
dial-peer voice 2222 voip
destination-pattern 2222
session target ipv4:1.1.1.2
-------
BB3>
------------
dial-peer voice 2222 pots
destination-pattern 2222
port 1/1/0
!
dial-peer voice 1111 voip
destination-pattern 1111
session target ipv4:1.1.1.1
=>To test the clause "When Phone-C calls to the 1111,
Phone-A should ring Only if Phone-B is in busy-state..."
, I set the voice-port 1/0/1 to be in the Busy-state
by configuring the command "busyout forced" under
the voice-port 1/0/1 in R1.
=> And i call to the 1111 from Phone-C
But Phone-A Don't call ring !!!!
My configuration is not correct ??
What's the correct answer ??
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:49 GMT-3