From: chirag (chiragshroff@myrealbox.com)
Date: Sun Jan 25 2004 - 02:51:33 GMT-3
arvind
can u give send sample configuration of hunt-group in the same example
thnx
chirag shroff
----- Original Message -----
From: "Arvind Yadav" <arvindyadav@comcast.net>
To: <wwwjjang@chol.com>; <ccielab@groupstudy.com>
Sent: Sunday, January 25, 2004 12:37 AM
Subject: Re: VoIP's Hunt-Group Test...
> Configuration looks fine.
>
> The lower the preference number, the higher the priority. Given below
> example pnone B has the higher prority then phone A. Call should go to
phone
> B first, if phone B busy then only it will go to Phone A.
>
> Try with
>
> Router(config)# voice hunt {user-busy)
>
> Arvind
>
> ----- Original Message -----
> From: <wwwjjang@chol.com>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, January 24, 2004 10:12 AM
> Subject: VoIP's Hunt-Group Test...
>
>
> > Hi..Everyone..
> >
> > I'm studying VoIP Hunt-Group Test..
> > But it doesn't work well..
> >
> > Who knows the reason ???
> > Help me...
> >
> > --------
> > Diagram
> > --------
> >
> > Phone-A(1111)--R1-S0(1.1.1.1)-----s0(1.1.1.2)-R2----Phone-C(2222)
> > /
> > /
> > Phone-B(1111)
> >
> > ----------
> > Question
> > ----------
> > -I wish When Phone-C calls to the 1111,
> > Phone-A should ring Only if Phone-B is in busy-state...
> > -When Phone-B is not busy, Phone-B should ring..
> > ----------
> > My-Config
> > ----------
> >
> > -----
> > R1>
> > ------
> > dial-peer voice 1111 pots **>Phone-A
> > preference 2 **
> > destination-pattern 1111
> > port 1/0/0
> > !
> > dial-peer voice 11111 pots **>Phone-B
> > preference 1 **
> > destination-pattern 1111
> > port 1/0/1
> > !
> > dial-peer voice 2222 voip
> > destination-pattern 2222
> > session target ipv4:1.1.1.2
> >
> > -------
> > BB3>
> > ------------
> > dial-peer voice 2222 pots
> > destination-pattern 2222
> > port 1/1/0
> > !
> > dial-peer voice 1111 voip
> > destination-pattern 1111
> > session target ipv4:1.1.1.1
> >
> > =>To test the clause "When Phone-C calls to the 1111,
> > Phone-A should ring Only if Phone-B is in busy-state..."
> > , I set the voice-port 1/0/1 to be in the Busy-state
> > by configuring the command "busyout forced" under
> > the voice-port 1/0/1 in R1.
> > => And i call to the 1111 from Phone-C
> > But Phone-A Don't call ring !!!!
> >
> > My configuration is not correct ??
> > What's the correct answer ??
> >
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:50 GMT-3