RE: Fall-Back Bridging!

From: SANCHEZ-MONGE,ANTONIO (HP-France,ex2) (antonio.sanchez-monge@hp.com)
Date: Sat Jan 24 2004 - 12:12:00 GMT-3

• Next message: wwwjjang@chol.com: "VoIP's Hunt-Group Test..."
• Previous message: phase90: "Re: ISDN Multilink ( Problem to bring 2nd channel up )"
• Maybe in reply to: Nathasha Aleyevka: "Fall-Back Bridging!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Nathasha,

I suggest to try:

bridge 1 protocol vlan-bridge
interface vlan 1
bridge-group 1
interface vlan 2
bridge-group 1

Cheers,
Ato.

-----Original Message-----
From: Nathasha Aleyevka [mailto:naleyevka@yahoo.com]
Sent: viernes, 23 de enero de 2004 21:12
To: ccielab@groupstudy.com
Subject: Fall-Back Bridging!

Hi,

I am configuring DLSW, R1 is the DLSW router

NETBIOS------VLAN1-----3550
                        |
                        |
                      VLAN2
                        |
                       R1
                        |
                        |
                   Frame-Relay

I need to allow Netbios traffic from VLAN1 across the
Frame Relay network to a different network. I have
configured DLSW on R1, but VLAN1 is not directly
connected to R1's E0 interface, I was reading about
fall-back bridging,which consists in bridging
protocols between VLANs,while routing others.
Do I need to configure 2 bridges on the 3550, one for
each VLAn? Please advise.
Thank you
Nathasha

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!
http://webhosting.yahoo.com/ps/sb/

• Next message: wwwjjang@chol.com: "VoIP's Hunt-Group Test..."
• Previous message: phase90: "Re: ISDN Multilink ( Problem to bring 2nd channel up )"
• Maybe in reply to: Nathasha Aleyevka: "Fall-Back Bridging!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:49 GMT-3