From: Nathasha Aleyevka (naleyevka@yahoo.com)
Date: Fri Jan 23 2004 - 17:12:26 GMT-3
Hi,
I am configuring DLSW, R1 is the DLSW router
NETBIOS------VLAN1-----3550
|
|
VLAN2
|
R1
|
|
Frame-Relay
I need to allow Netbios traffic from VLAN1 across the
Frame Relay network to a different network. I have
configured DLSW on R1, but VLAN1 is not directly
connected to R1's E0 interface, I was reading about
fall-back bridging,which consists in bridging
protocols between VLANs,while routing others.
Do I need to configure 2 bridges on the 3550, one for
each VLAn? Please advise.
Thank you
Nathasha
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!
http://webhosting.yahoo.com/ps/sb/
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:49 GMT-3