From: Ashok Verma \(ashoverm\) (ashoverm@cisco.com)
Date: Thu Jan 22 2004 - 01:07:53 GMT-3
Hi All
I have a query about the NO SYNC .
I have following topology
R1______R2
\
\ __R3
R1, R2, R3 are in same AS and R1and R2 are FR ( where R2 is Hub and
ospf area 1 is running between them ), and R2- R3 is the normal HDLC
connection( OSPF area 0 is running between them).
BGP peering is done using the Loopback addresses , and peering is
working fine.Here R2 is working as Route reflector(only R2 is peer to R1
and R3,no peering between R2 and R3)
When I create a loopback on R1, and adverise with network command. It
reaches to R2 , but not as the best route and hence it is not send to
R3. Since the network was not redistributed in OSPF, I feel it is a
issue of Syncronization .so I disable the sync on R2 and then route is
avilable on R3.
Am I doing correct ?
Is NO sync is allowed in Real Lab exam?
Thanks in advance
Ashok Kumar Verma
CCIP,CCDP,CCNP
Network Consulting Engineer
Customer Advocacy Advanced Service Dep.
Service Provider AS Div.2
Cisco Systems, K.K.Japan.
Tel: +81-3-5324-4583
e-mail: ashoverm@cisco.com
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:48 GMT-3