From: Lee, Morgan (ML182301@exchange.TAIWAN.NCR.com)
Date: Mon Oct 27 2003 - 05:15:26 GMT-3
Hi ,
Please do not try to adjust the duplex & speed parameter in the production
envirement. Coz it will cause the error message from switch , Cisco TAC
recommend to keep the speed & duplex to auto .
-----Original Message-----
From: Rivalino YMT [mailto:rivalino_ymt@BonBon.net]
Sent: Monday, October 27, 2003 10:23 PM
To: C
Cc: ccielab@groupstudy.com
Subject: RE: 2 Questions on Voice Vlan
Just want to know,
Why do you use 'switcport trunk native vlan 500'?
why not 'switchport trunk native vlan 100'? Voice packet is untagged packet.
Thanks,
Rv
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of C
Sent: Saturday, October 25, 2003 4:17 AM
To: loai@kuix.com
Cc: ccielab@groupstudy.com
Subject: RE: 2 Questions on Voice Vlan
This is what you should be using:
In my case I am using port 1 & 2 to connect to other switch using
EtherChannel, port 3 is connecting to IP phone and PC. What switch are you
talking about? My config is for 2924 and 3500's
interface FastEthernet0/1
duplex full
speed 100
port group 1
switchport trunk encapsulation dot1q
switchport trunk native vlan 20
switchport mode trunk
!
interface FastEthernet0/2
duplex full
speed 100
port group 1
switchport trunk encapsulation dot1q
switchport trunk native vlan 500
switchport mode trunk
!
interface FastEthernet0/3
switchport access vlan 500
switchport trunk encapsulation dot1q
switchport trunk native vlan 500
switchport mode trunk
switchport voice vlan 100
switchport priority extend cos 0
spanning-tree portfast
Chris
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
loai@kuix.com
Sent: Friday, October 24, 2003 4:27 PM
To: loai@kuix.com
Cc: ccielab@groupstudy.com
Subject: Re: 2 Questions on Voice Vlan
Dears..
No one can answer this question?
Where r u dears Experts?
----- Original Message -----
From: loai@kuix.com
Date: Thursday, October 23, 2003 12:14 pm
Subject: 2 Questions on Voice Vlan
> Dears..
> I have 2 Qeustions
>
> 1-If i have IP phone is attached to SW port for
> example(F0/10),this phone support dot1.q trunking..
> andIf i want to configure this port to support voice on vlan100
> and ensure that data goes to vlan500..
> in this case:
>
> interface FastEthernet0/10
> switchport access vlan 500
> switchport voice vlan 100
> switchport trunk encapsulation dot1q
>
> my question is
>
> 1-When it should be to use
> switchport mode trunk in this case..
>
> 2-whenI have to use
> switchport trunk native vlan?
>
> 3-Could some one provide me the last solution or configuration for
> this question..
>
> Thanx
>
> Nizar
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials
> from:http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:08 GMT-3