From: Rivalino YMT (rivalino_ymt@BonBon.net)
Date: Mon Oct 27 2003 - 11:22:41 GMT-3
Just want to know,
Why do you use 'switcport trunk native vlan 500'?
why not 'switchport trunk native vlan 100'? Voice packet is untagged packet.
Thanks,
Rv
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of C
Sent: Saturday, October 25, 2003 4:17 AM
To: loai@kuix.com
Cc: ccielab@groupstudy.com
Subject: RE: 2 Questions on Voice Vlan
This is what you should be using:
In my case I am using port 1 & 2 to connect to other switch using
EtherChannel, port 3 is connecting to IP phone and PC. What switch are you
talking about? My config is for 2924 and 3500's
interface FastEthernet0/1
duplex full
speed 100
port group 1
switchport trunk encapsulation dot1q
switchport trunk native vlan 20
switchport mode trunk
!
interface FastEthernet0/2
duplex full
speed 100
port group 1
switchport trunk encapsulation dot1q
switchport trunk native vlan 500
switchport mode trunk
!
interface FastEthernet0/3
switchport access vlan 500
switchport trunk encapsulation dot1q
switchport trunk native vlan 500
switchport mode trunk
switchport voice vlan 100
switchport priority extend cos 0
spanning-tree portfast
Chris
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
loai@kuix.com
Sent: Friday, October 24, 2003 4:27 PM
To: loai@kuix.com
Cc: ccielab@groupstudy.com
Subject: Re: 2 Questions on Voice Vlan
Dears..
No one can answer this question?
Where r u dears Experts?
----- Original Message -----
From: loai@kuix.com
Date: Thursday, October 23, 2003 12:14 pm
Subject: 2 Questions on Voice Vlan
> Dears..
> I have 2 Qeustions
>
> 1-If i have IP phone is attached to SW port for
> example(F0/10),this phone support dot1.q trunking..
> andIf i want to configure this port to support voice on vlan100
> and ensure that data goes to vlan500..
> in this case:
>
> interface FastEthernet0/10
> switchport access vlan 500
> switchport voice vlan 100
> switchport trunk encapsulation dot1q
>
> my question is
>
> 1-When it should be to use
> switchport mode trunk in this case..
>
> 2-whenI have to use
> switchport trunk native vlan?
>
> 3-Could some one provide me the last solution or configuration for
> this question..
>
> Thanx
>
> Nizar
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials
> from:http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:08 GMT-3