From: loai@kuix.com
Date: Thu Oct 23 2003 - 06:14:37 GMT-3
Dears..
I have 2 Qeustions
1-If i have IP phone is attached to SW port for example(F0/10),this phone support dot1.q trunking..
andIf i want to configure this port to support voice on vlan100 and ensure that data goes to vlan500..
in this case:
interface FastEthernet0/10
switchport access vlan 500
switchport voice vlan 100
switchport trunk encapsulation dot1q
my question is
1-When it should be to use
switchport mode trunk in this case..
2-whenI have to use
switchport trunk native vlan?
3-Could some one provide me the last solution or configuration for this question..
Thanx
Nizar
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:07 GMT-3