From: Georg Pauwen (pauwen@hotmail.com)
Date: Sat Aug 30 2003 - 10:53:56 GMT-3
Hello,
can you post your configs ? I cannot reproduce the problem, I either get
only the /26 IA route (without area range) or I get only the /24 IA route
(with area range).
Regards,
Georg
>From: navaid@rogers.com
>Reply-To: navaid@rogers.com
>To: ccielab@groupstudy.com
>Subject: ospf area range
>Date: Fri, 29 Aug 2003 12:56:16 -0400
>
>Question: I am using area range command on R2 to summarize 172.29.12.0/26
>as 24-bit mask. Why I am seeing more specific route on R5 ?
>
>R1----(area 12)----R2----(area0)----R5
> 172.29.12.0/26 172.29.100.0/29
>
>On R2 using following command:
>area 12 range 172.29.12.0 255.255.255.0
>
>On R1 I am seeing following two routes:
>O IA 172.29.12.0/24 [110/20] via 172.29.12.2, 00:04:20, Ethernet0/0
>C 172.29.12.0/26 is directly connected, Ethernet0/0
>
>On R5 I am seeing following two routes:
>O IA 172.29.12.0/26 [110/84] via 172.29.100.2, 00:05:40, Serial0
>O IA 172.29.12.0/24 [110/74] via 172.29.100.2, 00:05:40, Serial0
>
>
>_______________________________________________________________________
>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:10 GMT-3