ospf area range

From: navaid@rogers.com
Date: Fri Aug 29 2003 - 13:56:16 GMT-3

Next message: nettable_walker@comcast.net: "iBGP - is there an alternate to "no synch""
Previous message: Jonathan V Hays: "RE: Cat 3550 Documentation"
Next in thread: Georg Pauwen: "Re: ospf area range"
Maybe reply: Georg Pauwen: "Re: ospf area range"
Maybe reply: Waheed Mir: "Re: ospf area range"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Question: I am using area range command on R2 to summarize 172.29.12.0/26 as 24-bit mask. Why I am seeing more specific route on R5 ?

R1----(area 12)----R2----(area0)----R5
172.29.12.0/26 172.29.100.0/29

On R2 using following command:
area 12 range 172.29.12.0 255.255.255.0

On R1 I am seeing following two routes:
O IA 172.29.12.0/24 [110/20] via 172.29.12.2, 00:04:20, Ethernet0/0
C 172.29.12.0/26 is directly connected, Ethernet0/0

On R5 I am seeing following two routes:
O IA 172.29.12.0/26 [110/84] via 172.29.100.2, 00:05:40, Serial0
O IA 172.29.12.0/24 [110/74] via 172.29.100.2, 00:05:40, Serial0

Next message: nettable_walker@comcast.net: "iBGP - is there an alternate to "no synch""
Previous message: Jonathan V Hays: "RE: Cat 3550 Documentation"
Next in thread: Georg Pauwen: "Re: ospf area range"
Maybe reply: Georg Pauwen: "Re: ospf area range"
Maybe reply: Waheed Mir: "Re: ospf area range"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:10 GMT-3