From: Waheed Mir (ccnp2ccie@yahoo.com)
Date: Sat Aug 30 2003 - 13:13:18 GMT-3
I experienced this.. You may want to do as follows on R1 and R5, unless you have already tried..
(1) clear ip route * or specific 172.29.12.0
OR
(2) clear ip ospf process p-id
navaid@rogers.com wrote:
Question: I am using area range command on R2 to summarize 172.29.12.0/26 as 24-bit mask. Why I am seeing more specific route on R5 ?
R1----(area 12)----R2----(area0)----R5
172.29.12.0/26 172.29.100.0/29
On R2 using following command:
area 12 range 172.29.12.0 255.255.255.0
On R1 I am seeing following two routes:
O IA 172.29.12.0/24 [110/20] via 172.29.12.2, 00:04:20, Ethernet0/0
C 172.29.12.0/26 is directly connected, Ethernet0/0
On R5 I am seeing following two routes:
O IA 172.29.12.0/26 [110/84] via 172.29.100.2, 00:05:40, Serial0
O IA 172.29.12.0/24 [110/74] via 172.29.100.2, 00:05:40, Serial0
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:10 GMT-3