From: rwo@mac.com
Date: Sat Aug 23 2003 - 17:18:06 GMT-3
This command is definitely not in the Enterprise for 2600.
r8(config)#ip inspect
^
% Invalid input detected at '^' marker.
r8(config)#exit
r8#show ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JK9S-M), Version 12.2(19), RELEASE
SOFTWARE (fc3)
Just looked at this stuff last night. Content Based Access Control
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/
121cgcr/secur_c/scprt3/scdcbac.htm
Bob
On Saturday, August 23, 2003, at 04:01 PM, Richard L. Pickard wrote:
> are you running 12.3.x IOS firewall ?
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> emad
> Sent: Saturday, August 23, 2003 12:50 PM
> To: ccielab@groupstudy.com
> Subject: unknow command
>
>
> Folks,
> Does anyone know about this command and its usage?
>
> Ip inspect example ftp
>
> ??
>
> regards
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:05 GMT-3