From: rwo@mac.com
Date: Sat Aug 23 2003 - 17:08:29 GMT-3
Check your console messages. You should see a complaint about
duplicate id's.
They must be unique.
R1: net 13.0001.0000.0000.0001.00
R2: net 13.0001.0000.0000.0002.00
Good example:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/
122cgcr/fipr_c/ipcprt2/1cfisis.htm#13148
(search for "Enabling IS-IS Configuration Example")
Bob
On Saturday, August 23, 2003, at 02:59 PM, Richard L. Pickard wrote:
> I am working a lab that calles for the following:
>
> R_1 --- frame relay ---- R_3
>
> 7 Configure the Frame Relay link between R1 and R3 in the ISIS
> domain.
>
> 7 R1 and R3 should form no L1 adjacencies. R3 will be acting
> as a
> Backbone router.
>
> 7 Add R1 and R3s Loopback to the ISIS domain.
>
>
>
> HERE IS MY SOLUTION:
>
>
>
> hostname R_1
>
>
>
> clns routing
>
> interface Loopback0
>
> ip address 153.4.1.1 255.255.255.0
>
> ip router isis
>
>
> interface Serial0/0.13 point-to-point
>
> ip address 153.4.13.1 255.255.255.0
>
> ip router isis
>
> isis circuit-type level-2-only
>
> isis priority 0
>
> frame-relay interface-dlci 103
>
>
>
> router isis
>
> net 13.0001.0000.0000.0013.00
>
> is-type level-2-only
>
>
>
> ===============================================
>
> hostname R_3
>
>
>
>
> clns routing
>
>
>
> interface Loopback0
>
> ip address 153.4.3.3 255.255.255.0
>
> ip router isis
>
>
>
> interface Serial0/0.13 point-to-point
>
> ip address 153.4.13.3 255.255.255.0
>
> ip router isis
>
> isis circuit-type level-2-only
>
> frame-relay interface-dlci 301
>
>
> router isis
>
> net 13.0001.0000.0000.0013.00
>
> is-type level-2-only
>
> ===============================================
>
> R_3#
>
> R_3#ping 153.4.13.1
>
> Type escape sequence to abort.
>
> Sending 5, 100-byte ICMP Echos to 153.4.13.1, timeout is 2 seconds:
>
> !!!!!
>
> Success rate is 100 percent (5/5), round-trip min/avg/max = 28/29/32 ms
>
> R_3#sh clns neighbors
>
>
>
> R_3#sh ip route
>
> Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> E1 - OSPF external type 1, E2 - OSPF external type 2
> i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS
> level-2
> ia - IS-IS inter area, * - candidate default, U - per-user
> static
> route
> o - ODR, P - periodic downloaded static route
>
> Gateway of last resort is not set
>
> 153.4.0.0/24 is subnetted, 3 subnets
> C 153.4.23.0 is directly connected, Serial0/0.23
> C 153.4.13.0 is directly connected, Serial0/0.13
> C 153.4.3.0 is directly connected, Loopback0
> R_3#
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:05 GMT-3