From: dhoang4@yahoo.com
Date: Sun Aug 24 2003 - 21:19:20 GMT-3
I think you need to help IOS w/ firewall version so
you can config the router do some basic firewall
function
--- rwo@mac.com wrote:
> This command is definitely not in the Enterprise for
> 2600.
> r8(config)#ip inspect
> ^
> % Invalid input detected at '^' marker.
>
> r8(config)#exit
> r8#show ver
> Cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-JK9S-M), Version
> 12.2(19), RELEASE
> SOFTWARE (fc3)
>
> Just looked at this stuff last night. Content Based
> Access Control
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/
>
> 121cgcr/secur_c/scprt3/scdcbac.htm
>
> Bob
>
> On Saturday, August 23, 2003, at 04:01 PM, Richard
> L. Pickard wrote:
>
> > are you running 12.3.x IOS firewall ?
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> > emad
> > Sent: Saturday, August 23, 2003 12:50 PM
> > To: ccielab@groupstudy.com
> > Subject: unknow command
> >
> >
> > Folks,
> > Does anyone know about this command and its usage?
> >
> > Ip inspect example ftp
> >
> > ??
> >
> > regards
> >
> >
> >
>
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:06 GMT-3