Re: unknown command

From: ccie2002@tampabay.rr.com
Date: Sat Aug 23 2003 - 17:31:56 GMT-3


This and other IOS FW commands are only on FW or FW/IDS IOS releases.

like this ver

c3660-ik9o3s-mz.123-1a.bin"

----- Original Message -----
From: rwo@mac.com
Date: Saturday, August 23, 2003 4:18 pm
Subject: Re: unknown command

> This command is definitely not in the Enterprise for 2600.
> r8(config)#ip inspect
> ^
> % Invalid input detected at '^' marker.
>
> r8(config)#exit
> r8#show ver
> Cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-JK9S-M), Version 12.2(19), RELEASE
> SOFTWARE (fc3)
>
> Just looked at this stuff last night. Content Based Access Control
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/
> 121cgcr/secur_c/scprt3/scdcbac.htm
>
> Bob
>
> On Saturday, August 23, 2003, at 04:01 PM, Richard L. Pickard wrote:
>
> > are you running 12.3.x IOS firewall ?
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [nobody@groupstudy.com]On Behalf Of
> > emad
> > Sent: Saturday, August 23, 2003 12:50 PM
> > To: ccielab@groupstudy.com
> > Subject: unknow command
> >
> >
> > Folks,
> > Does anyone know about this command and its usage?
> >
> > Ip inspect example ftp
> >
> > ??
> >
> > regards
> >
> >
> >
> _______________________________________________________________________> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> _______________________________________________________________________> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:05 GMT-3