From: W. Kevin Hunt (khcisco@huntbrothers.com)
Date: Wed Apr 30 2003 - 10:35:00 GMT-3
You need to map the clns protocol to the dlci's
See
http://www.cisco.com/en/US/tech/tk472/tk474/technologies_tech_note09186a008009445a.shtml
----- Original Message -----
From: "Ivan" <limmti@yahoo.com.sg>
To: <ccielab@groupstudy.com>
Sent: Wednesday, April 30, 2003 4:24 AM
Subject: ISIS across Frame Relay Hub and spoke NBMA
> Hi All,
>
> Need some confirmation about ISIS running across a
> NBMA hub and spoke network using FR main interface.
>
> I understand that ISIS support 2 network type:
>
> 1. Point to point
> 2. Broadcast
>
> My question is can ISIS run across a Hub and Spoke
> Frame Relay using Frame Relay main interface, which by
> default is a multipoint interface.
>
> I tried it on my lab and it does not seems to learn
> the routes between spokes. Is this a normal behavior.
>
> Any advice is appreciated.
>
> Thank you
> Best Regards,
> Ivan
>
> __________________________________________________
> Do You Yahoo!?
> Promote your business from just $5 a month!
> http://sg.biztools.yahoo.com
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:10 GMT-3