From: Tim Fletcher (tim@fletchmail.net)
Date: Wed Apr 30 2003 - 10:53:31 GMT-3
Rich,
For the lab, it depends on the requirements of course, but either should
work in most cases. For the real world, I prefer the distance command
because, as you mentioned, you can have redundancy.
-Tim Fletcher #11406
At 07:47 PM 4/29/2003 -0700, Richard Davidson wrote:
>When you are doing mutual redistribution between two
>or more routers should you use route filtering or just
>rely on the distance command. If you filter you will
>lose the redundancy and still need the distance
>command. When should I filter based route and when
>should I use the Distance command?
>Thanks
>Rich
>
> <->
> OSPF|RIP
> |-------R2---|
>r1 ---< |--R4
> |-------R3---|
> OSPF|RIP
> <->
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:10 GMT-3