From: Carlos (cchorao@xtra.co.nz)
Date: Wed Apr 30 2003 - 12:42:31 GMT-3
Route tagging works as well.
Carlos Chorao (CCIE 11351 R&S)
Senior Technical Consultant
Telecom New Zealand
Advanced Solutions Group -Network Design and Security
Network Security and Design
----- Original Message -----
From: "Ivan" <limmti@yahoo.com.sg>
To: "Richard Davidson" <rich@myhomemail.net>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, April 30, 2003 9:46 PM
Subject: Re: mutual redistribution
> Hi Richard,
>
> If you are doing a multipoint mutual redistribution,
> you will encounter the issue of route feedback. By
> adjusting the admin distance itself will not be able
> to overcome this problem.
>
> In the case of mutual redistribution, I think we have
> to use route filtering (eg distribute-list).
>
> Thanks
> Ivan
>
> --- Richard Davidson <rich@myhomemail.net> wrote: >
> When you are doing mutual redistribution between two
> > or more routers should you use route filtering or
> > just
> > rely on the distance command. If you filter you
> > will
> > lose the redundancy and still need the distance
> > command. When should I filter based route and when
> > should I use the Distance command?
> > Thanks
> > Rich
> >
> > <->
> > OSPF|RIP
> > |-------R2---|
> > r1 ---< |--R4
> > |-------R3---|
> > OSPF|RIP
> > <->
>
> __________________________________________________
> Do You Yahoo!?
> Promote your business from just $5 a month!
> http://sg.biztools.yahoo.com
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:10 GMT-3