From: Jason Graun (jgraun@attbi.com)
Date: Wed Apr 30 2003 - 15:43:41 GMT-3
Very true, but given the diagram it is plain old RIP
-----Original Message-----
From: Carlos [mailto:cchorao@xtra.co.nz]
Sent: Wednesday, April 30, 2003 1:39 PM
To: Jason Graun; 'Ivan'; 'Richard Davidson'
Cc: ccielab@groupstudy.com
Subject: Re: mutual redistribution
rip2 does.
rip1 does not
Carlos Chorao (CCIE 11351 R&S)
Senior Technical Consultant
Telecom New Zealand
Advanced Solutions Group -Network Design and Security
Network Security and Design
----- Original Message -----
From: "Jason Graun" <jgraun@attbi.com>
To: "'Carlos'" <cchorao@xtra.co.nz>; "'Ivan'" <limmti@yahoo.com.sg>;
"'Richard Davidson'" <rich@myhomemail.net>
Cc: <ccielab@groupstudy.com>
Sent: Thursday, May 01, 2003 6:06 AM
Subject: RE: mutual redistribution
> Yes but RIP doesn't support route tagging
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Carlos
> Sent: Wednesday, April 30, 2003 10:43 AM
> To: Ivan; Richard Davidson
> Cc: ccielab@groupstudy.com
> Subject: Re: mutual redistribution
>
> Route tagging works as well.
>
>
>
> Carlos Chorao (CCIE 11351 R&S)
>
> Senior Technical Consultant
> Telecom New Zealand
> Advanced Solutions Group -Network Design and Security
>
> Network Security and Design
> ----- Original Message -----
> From: "Ivan" <limmti@yahoo.com.sg>
> To: "Richard Davidson" <rich@myhomemail.net>
> Cc: <ccielab@groupstudy.com>
> Sent: Wednesday, April 30, 2003 9:46 PM
> Subject: Re: mutual redistribution
>
>
> > Hi Richard,
> >
> > If you are doing a multipoint mutual redistribution,
> > you will encounter the issue of route feedback. By
> > adjusting the admin distance itself will not be able
> > to overcome this problem.
> >
> > In the case of mutual redistribution, I think we have
> > to use route filtering (eg distribute-list).
> >
> > Thanks
> > Ivan
> >
> > --- Richard Davidson <rich@myhomemail.net> wrote: >
> > When you are doing mutual redistribution between two
> > > or more routers should you use route filtering or
> > > just
> > > rely on the distance command. If you filter you
> > > will
> > > lose the redundancy and still need the distance
> > > command. When should I filter based route and when
> > > should I use the Distance command?
> > > Thanks
> > > Rich
> > >
> > > <->
> > > OSPF|RIP
> > > |-------R2---|
> > > r1 ---< |--R4
> > > |-------R3---|
> > > OSPF|RIP
> > > <->
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Promote your business from just $5 a month!
> > http://sg.biztools.yahoo.com
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:10 GMT-3