ISIS across Frame Relay Hub and spoke NBMA

From: Ivan (limmti@yahoo.com.sg)
Date: Wed Apr 30 2003 - 06:24:29 GMT-3

• Next message: Daniel Free: "Re: redistributing ISIS into OSPF not working"
• Previous message: David Heaton: "Re: Cisco Terminal Server/Access Server configuration with"
• Next in thread: W. Kevin Hunt: "Re: ISIS across Frame Relay Hub and spoke NBMA"
• Maybe reply: W. Kevin Hunt: "Re: ISIS across Frame Relay Hub and spoke NBMA"
• Maybe reply: G. R. Correia: "Re: ISIS across Frame Relay Hub and spoke NBMA"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi All,

Need some confirmation about ISIS running across a
NBMA hub and spoke network using FR main interface.

I understand that ISIS support 2 network type:

1. Point to point
2. Broadcast

My question is can ISIS run across a Hub and Spoke
Frame Relay using Frame Relay main interface, which by
default is a multipoint interface.

I tried it on my lab and it does not seems to learn
the routes between spokes. Is this a normal behavior.

Any advice is appreciated.

Thank you
Best Regards,
Ivan

• Next message: Daniel Free: "Re: redistributing ISIS into OSPF not working"
• Previous message: David Heaton: "Re: Cisco Terminal Server/Access Server configuration with"
• Next in thread: W. Kevin Hunt: "Re: ISIS across Frame Relay Hub and spoke NBMA"
• Maybe reply: W. Kevin Hunt: "Re: ISIS across Frame Relay Hub and spoke NBMA"
• Maybe reply: G. R. Correia: "Re: ISIS across Frame Relay Hub and spoke NBMA"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:10 GMT-3