From: G. R. Correia (razzolini80@hotmail.com)
Date: Wed Apr 30 2003 - 11:31:47 GMT-3
use (if)# isis priority 100 on the hub...should help. And there is a need
to map the dlci's and the clns...
hth
Guilherme
>From: Ivan >Reply-To: Ivan >To: ccielab@groupstudy.com >Subject: ISIS
across Frame Relay Hub and spoke NBMA >Date: Wed, 30 Apr 2003 17:24:29
+0800 (CST) > >Hi All, > >Need some confirmation about ISIS running
across a >NBMA hub and spoke network using FR main interface. > >I
understand that ISIS support 2 network type: > >1. Point to point >2.
Broadcast > >My question is can ISIS run across a Hub and Spoke >Frame
Relay using Frame Relay main interface, which by >default is a multipoint
interface. > >I tried it on my lab and it does not seems to learn >the
routes between spokes. Is this a normal behavior. > >Any advice is
appreciated. > >Thank you >Best Regards, >Ivan >
>__________________________________________________ >Do You Yahoo!?
>Promote your business from just $5 a month!
>http://sg.biztools.yahoo.com
------------------------------------------------------------------------
MSN 8 helps ELIMINATE E-MAIL VIRUSES. Get 2 months FREE*.
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:10 GMT-3