From: Jason Cash (cash2001@swbell.net)
Date: Mon Apr 21 2003 - 11:17:21 GMT-3
I agree, but the exercise didn't called for subinterfaces.
-----Original Message-----
From: Vijay S Jayaraman [mailto:vjayaram@in.ibm.com]
Sent: Monday, April 21, 2003 3:15 AM
To: Donny MATEO
Cc: Jason Cash; ccielab@groupstudy.com; nobody@groupstudy.com
Subject: Re: LLQ - can't verify
oops.....My statement wasnt right.......
actually what I meant to convey was to enable per PVC queuing TS is
required.......
When using a CBWFQ with frame relay, I have always used sub
interfaces........It doesnt make much sense, at least to me, to use it
on a
main interface.....
Sorry abt that....
Regards,
Vijay.
"Donny MATEO"
<donny.mateo@sg.ca-in To: Vijay S
Jayaraman/India/IBM@IBMIN
dosuez.com> cc: "Jason
Cash" <cash2001@swbell.net>, ccielab@groupstudy.com,
Sent by:
nobody@groupstudy.com
nobody@groupstudy.com Subject: Re: LLQ -
can't verify
04/21/2003 12:02 PM
Please respond to
"Donny MATEO"
I thought you can do it on the Main interface, but need to disable
frame-relay traffic-shapping ?
http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a
008009489a.shtml#choosingwheretoapplyaservicepolicy
Donny
"Vijay S
Jayaraman" To: "Jason Cash"
<cash2001@swbell.net>
<vjayaram@in.ibm. cc:
ccielab@groupstudy.com, nobody@groupstudy.com
com> Subject: Re: LLQ - can't
verify
Sent by:
nobody@groupstudy
.com
21-04-2003 13:22
Please respond to
"Vijay S
Jayaraman"
Jason,
you would need to use subinterfaces per PVC and then define the queuing
per
PVC.....also enable traffic shaping.....
The main interface supports only PIPQ and FIFO......
Regards,
Vijay.
"Jason Cash"
<cash2001@swbell. To:
<ccielab@groupstudy.com>
net> cc:
Sent by: Subject: LLQ - can't
verify
nobody@groupstudy
.com
04/21/2003 08:29
AM
Please respond to
"Jason Cash"
I am trying to confirm the LLQ config and keep getting this error:
r5#sh queue serial 0
Show queue not supported with FIFO queueing
The config is just like the solution of IPE Section 12 so why can I not
verify the queue?
hostname r5
!
logging buffered notifications
!
!
class-map data
match access-group 106
class-map voice
match access-group 105
!
!
policy-map voice
class voice
priority 80
class data
priority 48
!
ip subnet-zero
no ip domain-lookup
!
interface Loopback0
ip address 200.0.0.5 255.255.255.255
!
interface Ethernet0
ip address 150.50.7.5 255.255.255.128
!
interface Serial0
ip address 150.50.100.5 255.255.255.224
encapsulation frame-relay
no ip mroute-cache
service-policy output voice
frame-relay traffic-shaping
frame-relay class voice
frame-relay map ip 150.50.100.2 501 broadcast rtp header-compression
active connections 256
frame-relay map ip 150.50.100.5 501
frame-relay map ip 150.50.100.6 501 broadcast
no frame-relay inverse-arp
!
interface Serial1
no ip address
shutdown
!
router eigrp 1
network 0.0.0.0
no auto-summary
no eigrp log-neighbor-changes
!
map-class frame-relay voice
frame-relay cir 128000
frame-relay bc 300
no frame-relay adaptive-shaping
access-list 105 permit ip any any precedence critical
access-list 106 permit ip any any
!
end
This message is for information purposes only and its content
should not be construed as an offer, or solicitation of an offer,
to buy or sell any banking or financial instruments or services
and no representation or warranty is given in respect of its
accuracy, completeness or fairness. The material is subject
to change without notice. You should take your own independent
tax, legal and other professional advice in respect of the content
of this message. This message may contain confidential or
legally privileged material and may not be copied, redistributed
or published (in whole or in part) without our prior written consent.
This email may have been intercepted, partially destroyed,
arrive late, incomplete or contain viruses and no liability is
accepted by any member of the Credit Agricole Indosuez group
as a result. If you are not the intended recipient of this message,
please immediately notify the sender and delete this message
from your computer.
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:59 GMT-3